← All articles

Materials & Finishes · 07 Nov 2026 · 19 min read

Choosing Door Hardware: Hinges, Handles and Locks in India

Choosing Door Hardware: Hinges, Handles and Locks in India — cover

Hardware is the part of a door that does the work. The leaf is just a board; it is the hinges that carry it, the handle that moves it and the lock that secures it, and these are the parts a hand touches thousands of times a year. Yet hardware is routinely the last thing chosen on an Indian project and the first place the budget is cut. A beautiful teak door hung on two thin pressed hinges will sag and bind within a year; a solid flush door with a loose, rattly handle feels cheap however good the carpentry; and a main door with a weak lock undoes the security the whole wall was built for.

The choices are not complicated once the logic is clear. Hinges are sized and counted to the weight and height of the door. Handles and locks are chosen for the job — a privacy latch on a bathroom, a mortise lock on a bedroom, a heavy multi-point lock on the main door — and set at heights that suit the hand. Finishes are picked for the room's conditions, because a hinge that is fine on an internal door will rust on a bathroom or a balcony door. This article takes each in turn, with the dimensions and indicative October 2026 costs an Indian homeowner or designer needs, to be confirmed locally.

The thread running through it is that hardware should be matched to the door and the room, not bought as an afterthought in a single cheap set for the whole house. A little thought here is what separates a door that works silently for decades from one that announces every fault it has.

A short history of the door fitting

Door hardware is among the oldest manufactured objects in a home, and its evolution is a story of the lock catching up with the thief. Early Indian doors turned on pivots set into the frame and sill rather than on hinges, and were barred from the inside with heavy timber or iron. The surface-mounted iron latch, the sliding bolt and the hasp-and-staple with a padlock served for centuries and are still sold today as the tower bolt and the aldrop. The mortise lock — a lock buried in a pocket cut into the edge of the door — arrived with industrial manufacturing and became the standard for a secure, neat internal and entrance door because nothing of the mechanism shows on the face.

The modern Indian market layers all of this together. A traditional main door may still carry an aldrop and a tower bolt alongside a modern mortise lock; a contemporary flat may use cylindrical locks and lever handles throughout; and the newest homes add digital and multi-point locks on the entrance. Hinges have travelled a similar road, from the hand-forged strap and the pivot to the pressed butt hinge, and then to the ball-bearing and concealed hinges that carry today's heavy flush and designer doors. Knowing which belongs where is the whole of the subject.

Hinges: carrying the door

A hinge has one job — to carry the weight of the door and let it swing freely for years without sagging — and it is chosen on three counts: type, size and number. The workhorse is the butt hinge, a pair of leaves jointed by a pin, mortised into the edge of the door and the frame. Plain butt hinges suit light internal doors; ball-bearing butt hinges, which run on tiny bearings in the knuckle, are used for heavy and frequently used doors because they carry more and do not wear loose. Concealed hinges hide entirely within the door edge for a flush, hardware-free look, and are common on wardrobe shutters and designer doors. The material matters as much as the type: stainless steel resists rust and is the safe default in India, especially near water.

Fig. 1 — Butt hinge, and hinge count by door height 100-125 leaf knuckle + pin 2 hingeslight, ≤ 2000 3 hingesstandard 2100 4 hingestall / heavy Top hinge about 150-250 mm from the top, bottom hinge about 250 mm from the floor, the third near the lock height.
Fig. 1 — Butt hinge anatomy and how many a door needs (mm)

How many hinges a door needs follows a simple rule: two for a light, short door, three for a standard full-height internal door, and four for a tall or heavy leaf such as a solid teak main door. The third hinge, set near the middle but biased towards the lock height, stops the door bowing and takes the strain of slamming. Hinge leaves of about 100 to 125 mm suit most residential doors, with the top hinge placed roughly 150 to 250 mm below the top, the bottom hinge about 250 mm above the floor, and the middle hinge nearer the top than the centre so it resists the leverage of the handle. Under-hinging — two pressed hinges on a heavy door — is the single commonest cause of doors that drop and bind.

DoorTypical weightHingesHinge typeSize
Light internal (hollow flush)under 20 kg2-3Plain or ball-bearing butt100 mm
Standard internal (solid flush)20-35 kg3Ball-bearing butt100-125 mm
Bathroom / balcony door15-30 kg3Stainless ball-bearing100-125 mm
Heavy / designer / teak35-55 kg4Ball-bearing, heavy duty125 mm
Main entrance door40-70 kg4Heavy ball-bearing / concealed125 mm
Wardrobe shutter5-15 kg2-4Concealed (auto / soft-close)35 mm cup

Handles and locks: the heights and the types

Handles and locks are set at heights that the hand finds without thinking, and in India these have settled close to international norms. The handle or lever centre sits at about 900 to 1050 mm above the finished floor — roughly waist to hip height — and the lock keyhole or thumb-turn is usually in the same plate or just below. A lever handle is easier to use than a round knob, especially for children, the elderly and anyone with full hands, which is why levers have largely replaced knobs on internal doors. The backset — the distance from the door edge to the centre of the handle — is typically 60 to 65 mm for residential mortise locks, and this must match the handle plate and the lock body.

Fig. 2 — Standard handle and lock heights 1000 handle 950 lock 900 leaf width lever Lever beats knob easy with fullhands, for all ages backset 60-65 mm
Fig. 2 — Handle and lock heights on a door (elevation, mm)

The lock itself comes in two broad families. The mortise lock sits in a pocket cut into the door edge, with the handle and the keyhole on plates either side; it is strong, neat, and the standard for Indian bedroom, entrance and good internal doors. The cylindrical or tubular lock fits through two round holes bored in the face and edge, is quicker to install and cheaper, and suits lighter internal doors. Bathrooms use a privacy function — a thumb-turn inside and an emergency release outside, with no key — while bedrooms use a keyed or thumb-turn lock and the main door uses a heavy mortise or multi-point lock. The function, not just the look, must be specified for each door.

Fig. 3 — Mortise lock in the door edge (plan) backset 60-65 35-45 spindle + keyhole strike in frame door leaf The lock body is buried in a pocket cut into the door edge; the backset (edge to spindle) is usually 60-65 mm and must match the handle plate and the lock. The bolt throws into a strike plate fixed in the frame — a deeper throw is safer.
Fig. 3 — Mortise lock in the door edge: backset and bolt throw (plan, mm)

The backset shown in the figure — the distance from the door edge to the centre of the spindle, usually 60 to 65 mm for a residential mortise lock — must match the handle plate and the lock body, or the handle will not line up with the mechanism. The depth of the bolt throw matters for security: a bolt that throws deep into a strike plate well fixed in the frame resists a forced push far better than a shallow latch. For the main door this is the difference between a lock that holds and one that is sprung with a shoulder, which is why entrance locks use a long, hardened bolt, or several bolts thrown at once, into a frame that is itself anchored firmly into the wall.

Lock / latchWhere it belongsFunctionIndicative cost (Oct 2026)
Mortise lock (lever handle set)Bedrooms, entrance, good internalKeyed / thumb-turn₹1,500-6,000
Cylindrical / tubular lockLight internal doorsKeyed or passage₹500-2,000
Privacy latch (bathroom)Bathrooms, toiletsThumb-turn + emergency release₹400-1,500
Passage latch (no lock)Kitchen, store, pantryLatch only₹250-900
Main-door mortise / multi-pointEntrance doorMulti-bolt, high security₹4,000-15,000+
Digital / smart lockEntrance doorPIN / card / app₹8,000-30,000+

The main door: security hardware

The entrance door is the one door where hardware is a security decision, not just an ergonomic one. A heavy leaf, a strong frame well anchored into the wall, and a lock whose bolts throw deep into that frame are what resist a forced entry; a good lock on a weak frame, or a strong frame with a flimsy lock, is only as strong as its weakest part. A main-door mortise lock with a hardened bolt, or a multi-point lock that throws bolts at several heights, is the sensible core, often backed by a traditional aldrop and a night latch or a door viewer. Digital locks add convenience and a keyless record of who comes and goes, but they still depend on a sound door and frame beneath them.

The hinges on a main door matter for security too. An outward-opening door with exposed hinge pins can be attacked at the hinge; this is why main doors usually open inward, or use hinges with fixed or dog-bolt pins that cannot be knocked out. Four heavy ball-bearing or concealed hinges carry the weight, and a door closer or a simple spring is sometimes added so the door is never left ajar. These are small costs against the value of what the door protects, and they are the wrong place to economise.

Fig. 4 — Main door: multi-point locking 1000 handle top bolt lock + bolt bottom bolt viewer aldrop A multi-point lock throws bolts at several heights into a strong frame, backed by an aldrop and a viewer; open the door inward.
Fig. 4 — Main door: a multi-point lock throwing bolts at several heights (elevation)

A main-door multi-point lock, shown above, throws bolts at the top, middle and bottom of the leaf with a single lift of the handle or turn of the key, spreading the resistance along the whole height of the door rather than at one point. Backed by a traditional aldrop, a night latch or a viewer, and hung on four heavy hinges whose pins cannot be knocked out, it makes the entrance as strong as the wall around it. The lock is only half the job, though: it must throw into a strong frame that is itself well anchored into the masonry, because the finest lock on a weak frame is sprung at the frame, not the bolt. On the main door, the frame, the hinges and the lock are one security system and must be specified together.

Finishes and the small hardware

Finish is a decision about conditions as much as looks. Stainless steel, in grades suited to the exposure, is the dependable default across an Indian home and the right choice for bathrooms, balconies and anywhere near water; brass and antique finishes suit traditional and main doors but need occasional care; and matte black and powder-coated finishes are fashionable but should be checked for durability in wet rooms. Near the coast, only marine-grade stainless and sealed fittings survive the salt air without pitting. The rule is to let the room choose the finish: a handsome brass handle that tarnishes and a pretty hinge that rusts are false economies in the wrong place.

Beyond the headline hinge, handle and lock sit a dozen small items that quietly make doors work: the door closer that stops a door slamming, the floor spring under a heavy glass or main door, the magnetic or roller catch that holds a shutter shut, the soft-close hinge that stops a wardrobe banging, the tower bolt and aldrop on traditional doors, the door stopper that saves the wall from the handle, and the weather or dust seal on an external door. None is expensive, and each removes a daily irritation. A hardware schedule that lists these for every door, room by room, is the mark of a job thought through, and it is the cheapest insurance against a drawer of mismatched, forgotten parts turning up on fixing day.

Small hardwareJobWhereIndicative cost (Oct 2026)
Door closer (overhead)Closes the door gentlyMain, heavy internal₹800-3,000
Soft-close hinge / damperStops shutters bangingWardrobes, cabinets₹150-600 each
Tower bolt / aldropSecondary security / holdTraditional, main, terrace₹150-1,200
Door stopperProtects wall from handleAll swinging doors₹100-600
Magnetic / roller catchHolds a leaf shutLight internal, cabinets₹50-300
Door viewer / peepholeSee a callerMain door₹150-800

A hardware schedule by door type

The simplest way to get hardware right is to write a short schedule, door by door, before ordering anything. For each door it lists the leaf, the hinges, the handle and lock function, the finish and any extras, so nothing is forgotten and the finishes match. The table below is a starting schedule for a typical Indian home; Aaditya Interior prepares one like it on every project so the ironmonger supplies a coherent set rather than a drawer of mismatched parts. Costs are indicative October 2026 ranges for the hardware alone, to be confirmed locally.

DoorHingesHandle / lockFinishHardware cost (Oct 2026)
Main entrance4 heavy ball-bearingMulti-point / mortise + aldrop + viewerSS / brass₹6,000-25,000+
Master bedroom3 ball-bearingMortise lever, keyedStainless steel₹2,000-7,000
Other bedrooms3 ball-bearingMortise lever, thumb-turnStainless steel₹1,800-5,000
Bathroom3 SS ball-bearingPrivacy latch + leverMarine / SS₹1,200-3,500
Kitchen / utility3 buttPassage latchStainless steel₹900-2,500
Balcony / terrace3 SS ball-bearingMortise + tower boltMarine / SS₹1,800-5,000

Ten rules for choosing door hardware

  • Count hinges by weight and height: two for light doors, three for standard, four for heavy or main doors.
  • Use ball-bearing hinges on heavy and frequently used doors; never under-hinge a solid or teak leaf.
  • Set handles at about 900-1050 mm and match the backset (usually 60-65 mm) to the lock and plate.
  • Prefer lever handles to knobs — they are easier for children, the elderly and full hands.
  • Specify the lock function per door: privacy for bathrooms, keyed for bedrooms, high-security for the main door.
  • Give the main door a strong frame, four heavy hinges with non-removable pins, and a deep-throw or multi-point lock.
  • Choose the finish for the room: stainless near water, marine grade at the coast, brass only where it is cared for.
  • Add the small hardware — closer, soft-close, stopper, catch, viewer — on a schedule so nothing is forgotten.
  • Open the main door inward, or protect the hinge pins, so the hinges cannot be attacked from outside.
  • Buy a coherent set from a written door-by-door schedule, not a single cheap set for the whole house.

Frequently asked questions

How many hinges does a door need?

A light, short door needs two hinges, a standard full-height internal door needs three, and a tall or heavy door such as a solid teak main door needs four. The third and fourth hinges stop the leaf bowing and take the strain of slamming. Under-hinging a heavy door is the commonest cause of doors that drop and bind.

What is the standard height for a door handle in India?

The handle or lever centre is usually set about 900 to 1050 mm above the finished floor — roughly waist to hip height — with the lock in the same plate or just below. Lever handles are preferred over knobs because they are easier for children, the elderly and anyone carrying things.

Mortise lock or cylindrical lock — which is better?

A mortise lock sits in a pocket in the door edge, is stronger and neater, and is the standard for bedrooms, the entrance and good internal doors. A cylindrical or tubular lock fits through bored holes, is cheaper and quicker to install, and suits lighter internal doors. For security, the main door should have a mortise or multi-point lock, not a cylindrical one.

Which finish lasts best in Indian bathrooms and coastal homes?

Stainless steel in a suitable grade is the dependable default for bathrooms and wet areas, and marine-grade stainless with sealed fittings is the only reliable choice near the coast, where salt air pits ordinary metals. Brass and antique finishes suit traditional and main doors but need occasional care and are not ideal in wet rooms.

Sources & standards

  1. Bureau of Indian Standards — IS 1823 (mortice locks), IS 205 (non-ferrous metal butt hinges), IS 362 (parliamentary and other hinges), IS 3847 (mortice night latches)
  2. National Building Code of India 2016, Part 5 (Building Materials) and Part 3 (door and opening requirements)
  3. Ernst Neufert, Architects' Data — door, handle and lock heights and ironmongery
  4. Time-Saver Standards for Interior Design and Space Planning — door hardware and clearances
  5. Manufacturer standard ranges for hinges, mortise locks, lever handles and door closers in India (described generically)
  6. Price ranges: indicative October 2026 estimates for hardware — confirm with a local supplier before budgeting
Discuss your project