The crockery unit is the showpiece of an Indian dining room and the piece most often designed back to front. It is chosen for its glass shutters and its finish, and only later does the family discover that the dinner plates do not stand up in the shelves, the tall glasses do not fit, the good china has no safe home and there is nowhere for the cutlery. A crockery unit is a storage problem wearing a decorative face, and it works only when the inside is planned first — the plate stacks, the glass rows, the serving dishes and the bar — and the beautiful shutters are wrapped around that plan afterwards.
The tradition behind it is the sideboard and the glass-fronted showcase, long a fixture of Indian dining rooms where the best crockery is both stored and displayed. Today it has settled into a familiar form: a deeper base unit with a counter that serves as a landing for dishes, a shallower glass-fronted upper that displays and stores, and often a loft above for the once-a-year pieces. Each part has its own correct depth and height, and the shelves inside each have spacings that depend on what they hold. Get these wrong and an expensive unit stores less than a cheap cupboard; get them right and it holds the whole dining service with room to spare.
This article sizes the crockery unit part by part and then plans the inside: the base depth and counter height, the upper depth and glass-shutter spacing, the shelf heights for plates and glasses, the drawers and racks that organise cutlery and serving ware, and the bar section many families now want. It is a sizing and layout guide, so a reader can brief a carpenter on the inside, not just the outside.
What a crockery unit is, and its parts
A crockery unit is the dining room's storage-and-display cabinet, descended from the sideboard and the glass showcase. In its common modern form it has three or four parts stacked vertically. The base unit sits on the floor and carries the heavy, everyday and bulk storage behind solid shutters and in drawers; its top is the counter. The upper unit sits above, usually set back and shallower, with glass shutters to display and store the good crockery and glassware. Between them is an open gap — the counter back-splash zone — where a kettle, a fruit bowl or serving dishes land during a meal. And above the upper, often, is a loft: a closed cabinet up to the ceiling for seldom-used and seasonal pieces. Each part has a job, and each has a depth and a height that follow from that job.
Sizing the base unit
The base is the workhorse and follows kitchen logic. Its depth is about 600 mm, the same as a kitchen base, which suits large serving platters and bulk storage and gives a useful counter. Its height brings the counter to 850 to 900 mm — comfortable to set dishes on and to work at while serving. Inside, the base is best organised as a mix of drawers and shutters rather than deep open shelves: a top row of shallow drawers for cutlery and table linen, deeper drawers or pull-outs below for the heavy, everyday crockery and the pressure-cookers and serving bowls that have nowhere else to live. Drawers beat doors here because a 600 mm-deep cupboard behind a door loses its back half to darkness, while a pull-out brings everything forward.
The counter itself earns its keep during meals. A stone or a durable laminate top that can take a hot dish, a 300 mm or greater open gap above it before the upper unit begins, and a power point in that gap for a kettle or a hot-plate turn the counter into a genuine serving station. Keep the gap at least 300 mm so the counter is usable and not boxed in by the upper cabinet.
| Base-unit internal | Typical height / size | Holds |
|---|---|---|
| Top shallow drawer | 100 – 150 mm deep | Cutlery trays, table linen, napkins |
| Mid drawer | 200 – 250 mm deep | Everyday crockery, melamine sets |
| Deep drawer / pull-out | 300 – 400 mm deep | Serving bowls, cookers, bulk vessels |
| Doored shelf (with pull-out) | Full 600 mm depth | Large platters, appliances, reserve stock |
| Counter power point | In the open gap | Kettle, hot-plate, coffee machine |
Sizing the upper unit and its shelves
The upper unit is the display-and-store part, and its depth is deliberately shallower — about 300 mm, the same as a kitchen wall unit. A shallow upper keeps the counter below usable, stops anyone standing at the counter from knocking their head, and is the right depth for plates on edge and glasses in rows. The upper is usually glass-fronted, and its overall height runs about 900 to 1050 mm, divided into three or four shelves. The spacing of those shelves is the part that most often goes wrong, because a single even spacing fits nothing well. The shelves must be set out for what they hold.
The controlling dimensions are the heights of the items. A dinner plate stored on edge in a plate groove needs about 250 to 300 mm of clear height; a stack of plates lying flat needs less but is harder to reach. Bowls and katoris stacked need 150 to 200 mm. Tall glasses and tumblers need about 150 to 180 mm, and stemware a little more. Mugs and cups need 120 to 150 mm. The sensible plan is one taller shelf for plates on edge and serving dishes, a medium shelf for glasses and bowls, and a shorter shelf for cups and small items — with at least one of them adjustable. The table gives the working spacings.
| Item stored | Clear shelf height | Depth needed | Best storage |
|---|---|---|---|
| Dinner plates on edge | 250 – 300 mm | 250 – 280 mm | Plate groove or vertical rack |
| Serving dishes / platters | 200 – 260 mm | 280 – 300 mm | Base unit or tall upper shelf |
| Tall glasses / tumblers | 150 – 180 mm | 250 – 280 mm | Upper shelf, rows front to back |
| Stemware (wine glasses) | 200 – 240 mm | 250 – 280 mm | Under-shelf stem rail or tall shelf |
| Bowls / katoris stacked | 150 – 200 mm | 200 – 260 mm | Medium upper shelf |
| Cups / mugs | 120 – 150 mm | 180 – 220 mm | Short shelf or cup hooks |
Planning the inside: cutlery, racks and a bar
A crockery unit is only as good as its fittings. The base drawers should carry cutlery trays sized to the drawer, with a deep drawer for table linen and another for the heavy everyday vessels. In the upper, plate grooves or a simple vertical plate rack keep dinner plates upright and reachable rather than stacked and buried; a stem rail under a shelf hangs wine glasses safely; and a short shelf of cup hooks frees shelf space. Many Indian families now want a bar section built into the crockery unit — a dedicated bay with a taller shelf for bottles (a bottle needs roughly 300 to 350 mm of height), a stem rail for glasses, a small open counter to make a drink, and sometimes a lockable shutter. Placed at one end of the unit, the bar shares the finish and the lighting without taking over the display. The point throughout is to decide what goes where before the shutters are made, because a glass-fronted cabinet cannot be re-shelved as easily as it can be designed right.
It helps to make a simple inventory before the unit is drawn: how many dinner plates, quarter plates, bowls and katoris the family owns in its everyday set and in its good set; how many tall glasses, short glasses and cups; how many serving dishes, and the largest platter's diameter; and whether a bar is wanted at all. That list converts directly into shelf widths and heights — so many plates on edge needs so many millimetres of groove, so many glasses needs so much shelf length — and it exposes the awkward pieces early, the oversized biryani handi or the tall water jug that no standard shelf fits. A unit designed from a real inventory holds everything with a little room to grow; a unit designed from a picture holds whatever happens to fit and leaves the rest on the dining table.
Glass, back panels and lighting
Because the upper is on show, three details decide how it reads. The shutters are usually glass — clear, fluted or tinted — in a slim frame; fluted or reeded glass hides a less-than-perfect stack while still letting light through, and clear glass demands tidy contents. The back panel sets the backdrop: a mirror makes the display feel deeper and bounces light, a coloured laminate or a textured panel gives a calmer, richer background, and a plain painted back is the quiet default. Lighting lifts the whole unit: a slim LED profile along the front underside of each glass shelf, or a strip up each side, washes the crockery evenly, and a warm colour temperature flatters both china and wood. Keep the strip and its driver accessible and wire them before the unit closes, because a glass-fronted cabinet is hard to open up later.
| Component | Typical choice | Effect |
|---|---|---|
| Upper shutter glass | Clear / fluted / tinted | Fluted hides clutter; clear needs tidy stacks |
| Back panel | Mirror / laminate / paint | Mirror adds depth; laminate adds calm richness |
| Shelf material (upper) | Toughened glass / board | Glass shelves let light pass top to bottom |
| Shelf lighting | LED profile, warm white | Even wash of light over the display |
| Base counter | Stone / durable laminate | Takes hot dishes during serving |
| Loft shutters | Solid, flush | Hide seasonal pieces; keep the display clean |
Layouts and where to place the unit
The crockery unit takes four common shapes. A straight run along one dining wall is the default and the easiest to detail. An L-shaped unit turns a corner, adding counter and a natural spot for the bar on the return. A tall full-height display — glass from counter to ceiling — suits a formal dining room where showing the crockery is the point, at the cost of some closed storage. And a unit with an integrated bar devotes one end to bottles and glassware. Placement matters: the unit belongs on the wall nearest the kitchen so crockery travels a short path to and from the table, clear of the main circulation, and not so close to the dining chairs that a pulled-out chair fouls the shutters — keep about 900 mm to 1000 mm between the unit and the edge of the dining table for chairs and passage.
| Layout | Best for | Watch out for |
|---|---|---|
| Straight run | Most dining rooms; easy to detail | Needs enough wall length |
| L-shaped (corner) | Extra counter and a bar on the return | Corner bay is deep and can be dark |
| Tall full-height display | Formal rooms that show the crockery | Less closed, hidden storage |
| With integrated bar | Entertaining households | One end lost to bottles and glasses |
| Two-sided sideboard | Open-plan dining-living | Must be finished on both faces |
A last placement note concerns light and reflection. A glass-fronted upper placed opposite a window can mirror the glare and hide its contents behind a bright reflection, so a unit on the window wall or on a side wall usually displays better than one facing the light. Where the dining room is small, a shallower unit — a base and a single glass upper without a loft — keeps the room from feeling boxed in, and a mirror back panel borrows visual depth. These are judgement calls, but they follow the same logic as the dimensions: plan the unit for how it will actually be used and seen, not only for how it looks on the showroom floor.
Where crockery units are heading
The crockery unit is slowly merging with the kitchen and the living room. Open-plan homes increasingly treat it as a sideboard that faces both dining and living, finished on both sides. The bar section has moved from optional to common, and charging drawers and appliance garages — a shutter that hides a kettle or a coffee machine on the counter — are appearing in the base. Fluted glass and warm profile lighting have become the default look, and handleless, push-to-open shutters keep the face clean. Through all of it the storage logic holds: a 600 mm base with drawers, a 300 mm glass upper with shelves set for the actual plates and glasses, a loft for the seasonal pieces, and the inside planned before the outside.
Rules for designing a crockery unit
- Make the base 600 mm deep with a counter at 850–900 mm, and the glass upper only 300 mm deep.
- Leave at least a 300 mm open gap above the counter, with a power point, so it works as a serving station.
- Use drawers and pull-outs in the deep base, not deep doored shelves that lose their back half.
- Set upper shelves for the contents: about 280 mm for plates on edge, 150–180 mm for glasses, 130 mm for cups.
- Store dinner plates upright in a groove or rack, and hang stemware on an under-shelf rail.
- Give any bar bay a 300 mm+ shelf for bottles, a stem rail and a small open counter to mix a drink.
- Light the upper with a warm LED profile per shelf, wired and accessible before the unit is closed.
- Place the unit near the kitchen, clear of circulation, with 900–1000 mm to the dining table for chairs.
Frequently asked questions
What is the standard size of a crockery unit?
There is no single size, but the working proportions are a base about 600 mm deep with a counter at 850 to 900 mm, a glass-fronted upper about 300 mm deep and 900 to 1050 mm tall, and often a loft above to the ceiling. Width follows the wall and the storage needed, commonly 1200 to 2400 mm. The depths differ on purpose — a deep base for platters, a shallow upper so the counter stays usable.
How deep should crockery unit shelves be?
About 600 mm for the base, which suits large serving dishes and bulk storage, and about 300 mm for the glass-fronted upper, which fits plates on edge and glasses in rows while keeping the counter below usable and clear of knocking heads. Matching kitchen base and wall depths keeps the unit consistent with the rest of the home's joinery.
How do you store plates in a crockery unit?
Store dinner plates upright on edge in a plate groove or a vertical rack rather than in tall stacks, so any plate can be taken without lifting the ones above it. Allow about 250 to 300 mm of clear shelf height for plates on edge. Stacked storage saves height but buries the lower plates, so reserve it for a rarely used second set.
Can a bar be built into a crockery unit?
Yes, and it is increasingly common. Devote one end or one bay to the bar: a taller shelf of 300 mm or more for bottles, a stem rail under a shelf for wine glasses, a small open counter to make a drink, and a lockable shutter if needed. Sharing the crockery unit's finish and lighting keeps it integrated rather than looking bolted on.
Where should a crockery unit be placed in the dining room?
On the wall nearest the kitchen, so crockery moves a short distance to and from the table, and clear of the main circulation so it is not in the flow of people. Keep about 900 to 1000 mm between the unit and the edge of the dining table, so a pulled-out chair does not foul the shutters and people can pass behind seated diners.
Sources & standards
- Ernst Neufert — Architects' Data: dining storage, sideboard and cabinet dimensions, shelf spacing
- Time-Saver Standards for Interior Design and Space Planning: dining and storage casework
- National Building Code of India 2016, Part 3 — Development Control Rules and General Building Requirements (room and circulation dimensions)
- Bureau of Indian Standards — IS 303: Plywood for General Purposes; IS 12406: Medium Density Fibreboard (casework materials)
- Bureau of Indian Standards — IS 2553: Safety glass; manufacturer data for toughened and fluted glass shutters, described as typical ranges
- Furniture-fittings manufacturer data for drawer systems, plate racks and stem rails, described as typical ranges
- Price ranges: indicative October 2026 estimates — confirm locally before budgeting



