A home is opened and closed hundreds of times a day, and every one of those actions passes through a piece of door hardware. The handle is the first thing a guest touches at the entrance and the last thing a family touches leaving a bedroom; the hinge carries the door's weight through tens of thousands of swings a year; the lock is what stands between the family and the street. Yet door hardware is routinely the last line on a specification, chosen by price from whatever the carpenter stocks, and the result shows within a year: a handle whose finish has rubbed off, a hinge that sags and drops the door, a lock that grinds.
The neglect is odd, because hardware is one of the few elements a person physically feels every day. A well-made handle in a sound finish has a weight and a smoothness that a cheap one never matches, and a correctly sized hinge keeps a heavy door swinging true for decades. The cost of good hardware is small against the cost of the door and the carpentry it serves, and the difference between adequate and poor hardware is felt daily in a way that a tile or a paint colour is not. Getting it right is a matter of understanding a handful of categories and matching them to the door and the room.
This guide takes door hardware apart into its working families — hinges, locksets and handles — explains the difference between a mortise lock and a cylindrical one, sets out the handle types and the heights at which they are fitted, and then turns to the question that most buyers actually ask first: the finish. Stainless steel, brass, matte black and PVD gold are not just colours; they are surface treatments with different durability, and choosing among them wisely is the difference between hardware that still looks new after five years and hardware that looks tired after one.
A short history of the door handle
For most of history a door was secured by a bolt, a latch or a bar, and opened by a simple knob or a ring. The handle as a designed object, separate from the lock, is relatively modern; traditional Indian doors used carved timber, wrought-iron rings and heavy sliding bolts, often beautiful but purely functional. The mortise lock — a lock housed in a pocket cut into the thickness of the door — arrived with industrial manufacturing and became the mark of a proper, solid door, because fitting one requires a deep, accurate pocket that only a substantial door can take.
The twentieth century brought the cylindrical lock, which needs only two round holes bored through the door rather than a chiselled pocket, making it faster and cheaper to fit. It spread through mass housing because a carpenter could install it in minutes. Alongside the locks, the lever handle replaced the round knob in most of the world, because a lever can be operated with an elbow or a full hand and suits the old, the young and anyone carrying things — a quiet piece of universal design that is now the default in Indian homes.
The finish story is newer still. For decades hardware was brass, chrome-plated steel or painted iron, and the plating wore through at the points most touched. The arrival of physical vapour deposition, or PVD, changed the economics of finish: a hard, thin, bonded coating in gold, rose gold, black or bronze that resists the rubbing and tarnishing that defeated old platings. PVD is why a gold handle today can keep its colour for years where a lacquered brass one would have dulled, and it has made coloured finishes a durable choice rather than a short-lived fashion.
Hinges: the part that carries the door
The hinge is the least glamorous and most important piece of door hardware, because it carries the entire weight of the door through every swing of its life. An undersized or poor-quality hinge sags, and a sagging door rubs the frame, sticks, and eventually will not latch. The everyday hinge in Indian homes is the butt hinge, a pair of leaves joined by a pin, set into the edge of the door and the frame. For interior doors the material of choice is stainless steel, which does not rust and keeps its finish; brass hinges are used where the look matters and mild steel only in the cheapest work, where it rusts and stains the paint around it.
The number and size of hinges follow the door's weight and height. A standard interior door needs at least three hinges — one near the top to resist sag, one near the bottom, and one in the middle — and a tall or heavy door, such as a solid main door or a large wardrobe shutter, may need four. The hinge should be long enough and the screws deep enough to carry the load into solid timber, not just into a thin lipping. Ball-bearing hinges, whose knuckle contains bearings, swing more smoothly and last longer on heavy or frequently used doors and are worth the small premium on a main door.
Beyond the simple butt hinge, specific doors use specific hinges. Concealed hinges, hidden within the door edge, give a clean look on wardrobe and some flush doors; the familiar cabinet hinge with its adjustable cup is a concealed hinge sized for furniture. Pivot hinges, set into the top and bottom of the door rather than the edge, carry very heavy or oversized doors and allow the dramatic frameless pivot entrance doors now fashionable. Spring and hydraulic floor springs return a door to closed and control its swing, used on heavy entrance and glass doors. Matching the hinge to the door's weight and use is the first and most practical hardware decision.
| Hinge type | Typical use | Notes |
|---|---|---|
| Butt hinge (SS) | Most interior and main doors | 3 per door standard, 4 for heavy/tall |
| Ball-bearing butt hinge | Heavy, high-use doors | Smoother, longer life; worth it on main door |
| Concealed / cabinet hinge | Wardrobe and flush shutters | Hidden, adjustable; clean look |
| Pivot hinge | Oversized and frameless doors | Carries heavy pivot entrance doors |
| Floor spring / hydraulic | Glass and heavy entrance doors | Controls swing and self-closes |
| Mild steel hinge | Cheapest work only | Rusts and stains paint; avoid |
Locksets: mortise versus cylindrical
The lockset is the mechanism that latches and locks the door, and the two families are the mortise lock and the cylindrical lock. A mortise lock sits in a deep pocket cut into the thickness of the door, with a lever handle on each side turning a spindle that withdraws the latch, and a key cylinder operating a separate dead bolt. It is the stronger, more substantial choice, with a reassuring weight and a long life, and it is the standard for main doors and better interior doors. It needs a solid door with enough stile width to take the pocket, which is why a hollow flush door of minimal thickness cannot always accept one.
A cylindrical lock, sometimes called a tubular or bored lock, needs only two round holes — a large cross-bore for the body and a smaller edge-bore for the latch — so it is far quicker and cheaper to fit and can go into lighter doors. The familiar knob-set and lever-set bathroom and bedroom locks are cylindrical. They are perfectly adequate for interior privacy doors, but they are generally less robust and less secure than a mortise lock, so they belong on internal doors rather than on the main entrance. The rule most designers follow is mortise for the main door and important rooms, cylindrical for secondary interior doors where cost and speed matter.
Security on the main door deserves particular thought. A good main-door mortise lock pairs with a quality cylinder, and the cylinder is the part that resists picking and bumping, so it is worth specifying a well-made cylinder with anti-pick features rather than the cheapest one. Multi-point locks, which throw bolts at several points up and down the door edge from a single handle action, give a higher level of security and better sealing on main and balcony doors and are increasingly used in premium homes. Smart locks, which add a keypad, fingerprint or phone unlocking to a mortise or multi-point body, are a growing category and are covered as a trend below.
Handles: types and heights
The handle is the hardware a person actually holds, and it comes in a few recognisable types. The lever handle on a backplate or on a pair of round roses is the everyday interior handle, operating the latch of a mortise or cylindrical lock. The pull handle — a bar or grip with no mechanism — is fitted to main doors, large doors and wardrobe shutters that do not need to latch from the handle, and on a statement entrance it can be a long vertical bar running much of the door's height. Knobs, once universal, are now used mainly for decorative and traditional looks, since a lever is easier to operate.
Handles are fitted at standard heights so that a home feels consistent and comfortable. Lever handles are typically set around 900 to 1050 mm above the finished floor, within easy reach of a standing adult and usable by a child. Long pull handles on a main door are centred a little higher but sized so both a tall adult and a child can grip somewhere along them. These are conventions rather than rigid rules, but keeping every door in a home to the same handle height is one of those small disciplines that makes a space feel professionally finished rather than assembled piecemeal.
Size and proportion matter as much as height. A spindly handle on a tall, heavy main door looks mean, and an oversized handle on a slim bathroom door looks clumsy. Main doors carry longer, heavier handles; interior doors carry lighter levers; wardrobes and drawers carry smaller pulls and knobs scaled to the shutter. Grip comfort is real too — a handle is held thousands of times, so its section should sit well in the hand and its edges should be rounded, not sharp. These are the things that separate hardware that feels considered from hardware that merely functions.
| Element | Standard height / size | Notes |
|---|---|---|
| Lever handle height | 900–1050 mm from floor | Easy reach for adults and children |
| Main-door pull handle | Centred ≈ 1000–1100 mm | Longer bar; grip reachable by all |
| Bathroom lock | With lever at 900–1050 mm | Privacy turn inside, release outside |
| Wardrobe pull / knob | Scaled to shutter | Smaller section than door handles |
| Door thickness (flush) | 30–40 mm interior | Must suit the lock chosen |
| Main door thickness | 40–50 mm or more | Solid; takes a mortise or multi-point lock |
Finishes: look and durability
The finish is what most buyers notice first and what most often disappoints later, because a finish is a surface treatment and surfaces wear. The base material of good hardware is usually stainless steel, brass or zinc alloy, and over it goes the finish that gives the colour and the protection. Satin or brushed stainless steel is the workhorse: it is the actual metal, not a coating, so it cannot wear through, it resists corrosion, and it hides fingerprints and small scratches. It is the safe, durable default for most of a home, and in humid and coastal conditions its corrosion resistance earns its place.
Coloured and decorative finishes are where durability varies most. Polished brass and antique brass give warmth and a traditional look but, if simply lacquered, the lacquer eventually rubs through at the most-touched points and the brass below tarnishes. Matte black is popular for a modern, graphic look; its durability depends entirely on how the black is applied — a powder-coated or PVD black lasts far better than a thin painted one, which chips. PVD finishes — gold, rose gold, bronze, black — are the durable way to have colour: the coating is bonded hard to the metal and resists the rubbing, tarnishing and chemicals that defeat platings and lacquers, which is why PVD gold keeps its colour for years.
The sensible approach is to match the finish to the room's punishment and the look wanted. Satin stainless steel or a PVD finish suits kitchens, bathrooms and high-use doors where hands, water and cleaning chemicals attack the surface daily. Lacquered brass and thin matte-black finishes are better kept to low-use, dry, decorative doors where they will not be rubbed constantly. Mixing two finishes across a home — say satin steel for working doors and a PVD gold or matte black for feature doors — is a common and effective strategy, provided it is a deliberate choice rather than an accident of what was in stock.
| Finish | What it is | Durability | Best for |
|---|---|---|---|
| Satin / brushed stainless steel | The metal itself, brushed | Excellent; cannot wear through | Most doors, kitchens, bathrooms, coastal |
| Polished chrome | Plating on brass or steel | Good; can pit over years | Bathrooms, bright modern look |
| Lacquered / antique brass | Brass with a lacquer coat | Moderate; lacquer rubs through | Low-use decorative and traditional doors |
| Matte black (PVD / powder) | Hard black coating | Good if PVD or powder-coated | Modern feature doors; avoid thin paint |
| PVD gold / rose gold / bronze | Bonded vapour-deposited colour | Excellent; keeps colour for years | High-use coloured hardware, feature doors |
What door hardware costs
Hardware spans an enormous range, from a basic cylindrical bathroom lock to a designer multi-point main-door set, and the ranges below are indicative October 2026 figures for supplied items in metro and tier-2 cities. They should be confirmed with a local dealer against the actual schedule, because brand, finish and security level move the numbers a great deal. The useful discipline is to spend where it is felt and seen — the main-door lock and handle, the high-use interior handles — and to economise on secondary doors, rather than buying uniformly cheap or uniformly expensive hardware across the home.
| Item | Indicative cost (₹) | Notes |
|---|---|---|
| Butt hinge (SS, per piece) | ₹80–300 | 3–4 per door; ball-bearing costs more |
| Cylindrical interior lock | ₹400–1,500 | Bedroom and bathroom privacy locks |
| Mortise lockset (interior) | ₹1,200–4,000 | Body, lever handles and cylinder |
| Main-door mortise / multi-point set | ₹3,500–15,000+ | Security cylinder and heavy handles |
| Lever handle (per set) | ₹500–4,000 | Finish and brand drive the range |
| Main-door pull handle | ₹1,500–12,000+ | Long bar handles; PVD costs more |
| Smart lock (keypad / fingerprint) | ₹8,000–30,000+ | Adds electronic unlocking to a lock body |
Where door hardware is going
Two trends are reshaping the category. The first is the smart lock, which replaces or supplements the key with a keypad, a fingerprint reader, a card or a phone, and which has moved quickly from novelty to a common main-door choice in Indian cities. The better smart locks are built on a proper mechanical lock body — a mortise or multi-point lock — so that the mechanical security remains even when the electronics are not used, and they retain a physical key override. The weak ones are mostly electronics on a flimsy latch, so the mechanical foundation still matters as much as the smart features.
The second trend is finish durability, driven by PVD. As PVD coating has become cheaper, coloured hardware that once faded within a year now holds its colour for years, which has freed designers to use gold, bronze, black and rose gold across a home with confidence. The combination is a market moving towards hardware that is both smarter and more durable: a main door that unlocks by fingerprint on a PVD-finished multi-point lock, interior doors in satin steel that never rusts. What has not changed is the hierarchy of what matters — the hinge must carry the door, the lock must secure it, the handle must feel right in the hand — and the finish, however fashionable, sits on top of those basics, not in place of them.
Nine rules for choosing door hardware
- Carry the door's weight first: use enough hinges of the right size, three per door and four on heavy or tall doors.
- Prefer stainless steel hinges and hardware for rust resistance, especially in kitchens, bathrooms and coastal homes.
- Use a mortise lockset on the main door and key rooms; keep cylindrical locks for secondary interior doors.
- On the main door, specify a good security cylinder or a multi-point lock, not the cheapest available.
- Fit lever handles at a consistent 900–1050 mm across the home so every door feels the same.
- Match handle size to the door — long heavy handles on main doors, lighter levers on interior doors.
- Choose satin steel or PVD finishes for high-use and wet areas; keep lacquered brass and thin black for dry feature doors.
- Treat matte black carefully — specify PVD or powder-coated black, not a thin paint that chips.
- If fitting a smart lock, build it on a proper mechanical lock body with a physical key override.
Frequently asked questions
Is a mortise lock better than a cylindrical lock?
For strength and security, yes — a mortise lock is more substantial and belongs on main doors and important rooms. A cylindrical lock is quicker and cheaper to fit and is fine for secondary interior privacy doors, such as bedrooms and bathrooms. The common strategy is mortise on the main and key doors, cylindrical on the rest, rather than using one type throughout.
Will a matte black handle's finish wear off?
It depends on how the black is made. A PVD or powder-coated black finish is hard and durable and holds up well, while a thin painted black chips at the most-touched points within a year. If matte black is wanted on a high-use door, specify PVD or powder coating; keep cheaper painted finishes to low-use, dry, decorative doors where they are not rubbed constantly.
Which finish lasts best in a humid or coastal home?
Satin or brushed stainless steel, because it is the metal itself rather than a coating and resists corrosion well, and quality PVD finishes, which are bonded hard to the metal. Lacquered brass and ordinary platings struggle in humidity and salt air as the coating fails and the base tarnishes or pits. For Surat and other humid or coastal locations, steel and PVD are the safe choices.
How many hinges does a door need?
A standard interior door needs at least three hinges — top, middle and bottom — and a tall or heavy door, such as a solid main door or a large shutter, often needs four. The top hinge resists sag, so it carries the most load; using too few or undersized hinges is the usual reason a door droops and starts to rub the frame.
Sources & standards
- Bureau of Indian Standards — IS 1823 (mortice locks), IS 362/IS 205 (hinges), IS 208 (door handles) and related hardware codes
- National Building Code of India 2016, Part 5 Building Materials and Part 6 Structural Design — timber doors and fittings
- Neufert Architects' Data — doors, ironmongery and handle heights reference sections
- Time-Saver Standards for Architectural Design Data — door hardware and finishes
- Manufacturer specifications for PVD, powder-coated and plated finishes (generic durability ranges)
- Price ranges: indicative October 2026 estimates — confirm locally before budgeting



