← All articles

Materials & Finishes · 03 Nov 2026 · 22 min read

Wall Cladding Types for House Facades

Wall Cladding Types for House Facades — cover

A home's facade is the first thing anyone sees and the surface that takes the full force of sun, rain and dust year after year, so the cladding that covers it is doing two jobs at once — it is the face of the house and its weather coat. In Indian towns and cities, where homes stand close together and a facade is often the one elevation a family can really express, the choice of cladding carries a lot of weight. Yet it is frequently made on looks alone, from a showroom sample seen under shop lighting, with little thought for how the material will behave against a west wall in May, how it will be fixed, how much it weighs, or what it will look like after three monsoons. The result is facades that stain, fade, bulge or fall within a few years.

Cladding is not the same as paint or plaster. Plaster and paint are thin coatings bonded directly to the wall; cladding is a separate skin of panels, tiles or boards fixed in front of the structural wall, often with a gap behind it. That gap is the key idea of modern cladding: a ventilated cavity that lets the wall breathe and drains away any water that gets past the face, so the structure stays dry and the cladding can move and dry independently. This is the rainscreen principle, and it is why a well-detailed cladding system outlasts a painted wall by a wide margin. Understanding it is the difference between a facade that is merely stuck on and one that is engineered to last.

This article sets out wall cladding for Indian house facades in practical terms: what cladding does and how the rainscreen idea works, the main families of cladding material used today and the standards behind them, how to choose by climate and orientation, the fixing systems and the all-important ventilated cavity, and how joints, drips and corners are detailed so the facade stays sound. It also gives indicative October 2026 costs and a checklist of rules. The emphasis is on matching the material and the system to the facade it has to survive on, rather than choosing a finish from a sample and hoping it copes.

From stone and lime to the modern rainscreen

Cladding a wall with a tougher, finer material than the structure behind it is an old idea in India. Temples and palaces were faced in dressed stone over rubble or brick cores; havelis carried carved stone and fine lime plaster over masonry; and traditional builders understood breathable lime renders and generous roof overhangs that kept rain off the wall face long before anyone spoke of rainscreens. What these old facades shared was an instinct that the outer skin takes the weather and the structure behind should be protected and allowed to breathe. The modern cladding industry has simply formalised that instinct into engineered systems: a sub-frame fixed to the wall, panels hung on it, and a ventilated gap between, with the water managed deliberately rather than by overhang and luck.

The shift from a stuck-on finish to a hung, ventilated system is the single biggest change in facades. A traditional applied finish — plaster and paint, or stone wet-fixed with mortar flat against the wall — relies entirely on the bond and the coating to keep water out, and when that bond fails, as it eventually does, water gets behind and cannot escape, so the finish blisters and the wall stays damp. A ventilated rainscreen accepts that a little water will always get past the outer face and plans for it: the open joints and cavity let that water drain and the airflow dry it, so the wall behind stays sound. This is why the serious cladding systems used today — for stone, metal, laminate, fibre cement and terracotta alike — are built as rainscreens on a sub-frame rather than glued flat.

Fig. 1 — Ventilated rainscreen cladding (section, mm) 30–50 8–20 cladding panel open horizontal joint vertical rail (sub-frame) bracket off the wall ventilated cavity structural wall Rainscreen cladding hangs off rails and brackets with a ventilated cavity of about 30–50 mm behind the panels and open joints, so any water that gets past the face drains and dries in the cavity rather than soaking the wall.
Fig. 1 — Ventilated rainscreen cladding (section, mm)

The families of facade cladding today

Facade cladding falls into a handful of families, and knowing their characters is more useful than chasing brand names. Natural stone — granite, sandstone, slate, limestone, Kota — is the heavy, long-lived, premium face, dignified and durable but demanding in weight and fixing. Aluminium composite panel (ACP) and solid metal sheets are the light, flat, colourful, crisp-lined choice seen on so many shopfronts and modern homes, quick to fix and available in endless finishes, though quality varies enormously and only fire-rated grades should be used. High-pressure laminate (HPL) is a dense, tough, exterior-grade board in a huge range of colours and wood looks, light and low-maintenance. Fibre-cement boards give a calm, matt, paintable surface at a sensible cost, and terracotta — fired clay panels and louvres — brings a warm, breathable, timeless material into a ventilated system.

Alongside these sit several others worth knowing. Brick slips — thin slices of brick stuck to a backing — give the look of exposed brickwork without a full masonry skin, though they are an applied finish rather than a ventilated rainscreen and need careful detailing against water. Wood-plastic composite (WPC) and treated timber bring warmth and a natural grain, suited to porches, soffits and feature panels more than whole exposed facades. Glass, as back-painted spandrel panels or a glazed skin, gives a sleek modern face but demands shading and careful detailing in the Indian sun. Each family is governed in India by the relevant Bureau of Indian Standards codes for the material and by the National Building Code of India 2016, which covers facade safety — including the important requirement that cladding on taller buildings meet fire-performance rules. The table compares the main families.

Cladding familyCharacterTypical thicknessBest for
Natural stoneHeavy, premium, long-lived≈ 20–40 mmPlinths, feature walls, dignified facades
ACP / metal panelLight, flat, crisp, colourful≈ 4 mm (panel)Modern homes, shopfronts — fire-rated only
High-pressure laminate (HPL)Tough, wide colour range≈ 6–10 mmLow-maintenance coloured and wood looks
Fibre-cement boardMatt, calm, paintable≈ 8–12 mmEconomical clean facades
TerracottaWarm, breathable, timeless≈ 18–30 mmVentilated rainscreens, louvres
Brick slipsExposed-brick look≈ 15–25 mmBrick character without a masonry skin

Choosing by climate and orientation

A facade is not uniformly exposed, and the cladding should answer the exposure of each elevation rather than being chosen once for the whole house. In most of India the west and south-west walls take the hardest punishment — the low, intense afternoon sun and, in many regions, the driving monsoon rain that arrives on that side — so these elevations earn the most robust, fade-resistant, well-shaded cladding, and benefit from external shading elements such as fins, screens or deep reveals as much as from the cladding itself. North walls are the gentlest, taking little direct sun, and can carry lighter, cheaper finishes. East walls take mild morning sun; south walls take high sun that is easier to shade with an overhang. Colour matters too: light colours reflect heat and stay cooler, while dark facades absorb it, so a dark cladding on a west wall is a double penalty of heat and fade.

Climate shapes the choice as much as orientation. In hot-dry regions the priorities are heat and dust: heavy or ventilated cladding that buffers the wall from heat, light colours, and surfaces that do not show or trap dust. In warm-humid and heavy-rain regions the priority is water and the growth it brings: a ventilated rainscreen that drains and dries, non-absorbent materials, and details that throw water clear of the face, because porous, poorly drained cladding grows algae and stains in the humidity. Coastal sites add salt, which attacks metal fixings, so stainless-steel fixings and corrosion-resistant materials become essential. In every case the ventilated cavity is the friend of the Indian climate, because it lets the wall breathe and dry whatever the weather throws at the face.

OrientationExposureCladding approach
West / south-westHardest sun and driving rainRobust, fade-resistant cladding plus external shading
SouthHigh sun, easy to shadeAny durable cladding with an overhang or fins
EastMild morning sunMost claddings suit; moderate shading
NorthGentle, little direct sunLighter, cheaper finishes acceptable
Coastal (any face)Salt attack on fixingsCorrosion-resistant material, stainless fixings
Humid / heavy-rainWater and algae growthVentilated rainscreen, non-absorbent face
Fig. 2 — Facade cladding families (typical thickness) Stone ACP / metal HPL Fibre cement Terracotta 20–40 mm 4 mm panel 6–10 mm 8–12 mm 18–30 mm Cladding ranges from heavy wet-fixed stone to light panels hung dry on a sub-frame. Thin, light panels (ACP, HPL, fibre cement, terracotta) suit dry rainscreen systems; heavy stone needs stronger fixings and backing. Weight, thickness and fixing all follow the material — pick the system and the detailing together, not the look alone.
Fig. 2 — Facade cladding families (typical thickness)

Fixing systems and the ventilated cavity

How cladding is held on is as important as what it is made of, and there are two broad approaches. Wet fixing sticks the cladding — usually stone or brick slips — directly to the wall with mortar or adhesive, flat against the surface with no cavity. It is simple and cheap and acceptable for small areas, low plinths and heavy stone close to the ground, but it offers no ventilation and no second line of defence, so if water gets behind it has nowhere to go. Dry fixing, the rainscreen approach, hangs the cladding on a sub-frame of brackets and rails fixed to the wall, leaving a ventilated cavity of about thirty to fifty millimetres behind the panels. For stone, dry fixing uses stainless-steel anchors or cramps that pin each slab; for panels, it uses an aluminium sub-frame with clips, hooks or rivets. Dry fixing costs more but is the durable choice for anything above plinth height and for a whole-facade system.

The cavity is the quiet hero of the system. Open joints between the panels let air flow into the gap and let any water that gets past the face drain down and out, while the moving air dries the cavity and the back of the panels. This keeps the structural wall dry, lets the cladding expand and contract freely, and buffers the wall from the heat of the sun, because the ventilated gap carries away heat before it reaches the structure. The fixings themselves must be chosen for the life of the facade: stainless steel resists the rust that would stain the face and eventually fail, whereas mild steel corrodes, bleeds rust marks down the cladding and loses its grip. Skimping on fixings to save a little money is the commonest way a good-looking facade comes to grief, because when a panel works loose high on a wall it becomes a safety hazard, not just a blemish.

Fig. 3 — Dry stone cladding: anchors and cavity (mm) 25–40 18–30 stone panel stainless anchor pin open joint ventilated cavity support angle at base structural wall Heavy stone is fixed dry to the wall with stainless-steel anchors and a base support angle, over a ventilated cavity. Stainless fixings resist rust; mild steel stains the face and fails. Each slab is restrained top and bottom.
Fig. 3 — Dry stone cladding: anchors and cavity (mm)

Detailing joints, drips and corners

A facade lives or dies at its joints and edges, and the details that manage water are what separate a cladding that ages gracefully from one that streaks and stains. The joints between panels are either open, as in a true rainscreen, where the cavity behind handles the water, or sealed with an exterior-grade movement sealant where the design calls for a closed joint; either way the joint must allow the panels to expand and contract, because a facade that is pinned rigidly will buckle or crack in the sun. Horizontal lines need drips — a small overhang or groove on the underside of a projecting element such as a sill, a band or a coping — so that rainwater running down the face is thrown clear instead of curling back under and tracking dirt across the wall in ugly streaks. Copings and sills are given a slight fall and an overhang for the same reason.

Corners, openings and the top and bottom of the facade are where cladding is most vulnerable and most often botched. External corners need a proper corner panel or a neat mitred junction rather than two panels meeting raggedly; openings for windows and doors need the cladding returned into the reveal and flashed so water cannot get in around the frame; the base of the cladding needs a starting detail that keeps it clear of splashback and ground damp; and the top needs a coping or closure that caps the cavity and stops water and birds getting in. These edge details are not decoration — they are where water tries hardest to get in and where panels are most likely to work loose. A facade with beautiful panels and careless edges will fail at the edges first, every time, which is why experienced designers spend as much thought on the corners and copings as on the panels themselves.

DetailProblem it solvesGood practice
Open / movement jointThermal movement, waterLet panels move; open joint or exterior sealant
Drip groove / overhangStreaking down the faceThrow water clear of sills, bands, copings
Corner panel / mitreRagged, weak cornersProper corner piece or neat mitred junction
Reveal return + flashingWater around openingsReturn cladding into reveal; flash the frame
Base starter detailSplashback and ground dampKeep cladding clear of the ground; drain the cavity
Coping / top closureWater and birds in the cavityCap the cavity with a falling, overhanging coping

Costs and where facades are heading

Cladding cost is driven by the material, the thickness and above all the fixing system, with dry, ventilated rainscreens costing more than wet-fixed finishes but lasting far longer. Painted exterior render remains the cheapest facade by a wide margin and is the sensible choice for budget elevations and sheltered north walls. Among true claddings, fibre cement and the lighter panel systems sit at the affordable end, HPL and good ACP in the middle, and natural stone — especially dry-fixed on anchors — and terracotta rainscreens at the premium end. External shading is a separate but valuable cost on sun-hit facades. The direction of travel in India is towards ventilated rainscreens as standard on serious facades, fire-rated panels after tightened safety rules, and a revival of breathable, lower-carbon materials such as terracotta and treated timber. Aaditya Interior generally steers clients towards a ventilated system on the exposed elevations and a simpler finish where the wall is sheltered, matching spend to exposure. The indicative October 2026 ranges below are for budgeting only and vary widely with material, height and quantity.

CladdingSystemIndicative Oct 2026 cost (per sq ft)
Exterior weather-shield paintApplied finish₹17–26
Brick slipsWet-fixed to plaster₹150–350
Natural stone (wet-fixed)Mortar on wall₹200–500
ACP / metal panelDry on sub-frame₹200–450 (fire-rated grades)
HPL / fibre-cement boardDry on sub-frame₹350–700
Terracotta rainscreenDry, ventilated system₹700–1,500

Ten rules for a sound facade

  • Match the cladding to each elevation's exposure — robust and shaded on west and south-west, lighter and cheaper on the north.
  • Prefer a ventilated rainscreen on a sub-frame for anything above plinth height; wet-fix only small, low, heavy areas.
  • Keep a ventilated cavity of about 30–50 mm behind the panels, with open or draining joints, so water escapes and the wall dries.
  • Use stainless-steel fixings and anchors, not mild steel, because rust stains the face and eventually fails.
  • Choose light colours on sun-hit facades to reflect heat, and add external shading — fins, screens, deep reveals — where the sun is harshest.
  • Use only fire-rated ACP and comply with the National Building Code's facade fire requirements, especially on taller buildings.
  • Let the panels move: open or movement joints throughout, never a facade pinned rigidly that will buckle or crack.
  • Detail drips and overhangs on sills, bands and copings so rainwater is thrown clear and never streaks the face.
  • Treat corners, reveals, the base and the coping as carefully as the panels — the facade fails at its edges first.
  • On coastal and heavy-rain sites, choose corrosion-resistant materials and fixings and make the cavity drain generously.
Fig. 4 — Cladding and shading by orientation low west sun WEST: shaded clad + fins NORTH: lighter finish West and south-west walls take the hardest sun and rain, so they earn the most robust cladding and external shading; north walls can take lighter, cheaper finishes. Match the cladding and the shading to each facade's orientation, rather than cladding the whole house the same way regardless of which way each wall faces.
Fig. 4 — Cladding and shading by orientation

Frequently asked questions

What is the difference between cladding and plaster?

Plaster and paint are thin coatings bonded directly to the wall; cladding is a separate skin of panels, tiles or boards fixed in front of the wall, usually with a ventilated gap behind it. That gap is the key difference: it lets the wall breathe and drains away any water that gets past the face, so the structure stays dry and the cladding can move independently. This rainscreen principle is why a well-detailed cladding system outlasts a painted wall by a wide margin. A wet-fixed finish stuck flat to the wall is closer to plaster in behaviour, with no cavity and no second line of defence against water.

Which cladding is best for an Indian facade?

There is no single best — the right choice depends on the elevation's exposure and the budget. For hard-hit west and south-west walls, a robust, fade-resistant, well-shaded cladding such as dry-fixed stone, good fire-rated ACP, HPL or a terracotta rainscreen suits best. For sheltered north walls, a lighter, cheaper finish, even good exterior paint, is sensible. In humid and coastal regions, a ventilated rainscreen with corrosion-resistant materials and stainless fixings is the durable answer. The common thread is a ventilated cavity, which suits the Indian climate on almost any facade.

Is ACP cladding safe?

Aluminium composite panel is safe when the right grade is used and the facade is detailed correctly, but quality varies enormously and the core material matters for fire. Only fire-rated grades should be used, and on taller buildings the facade must comply with the fire-performance requirements of the National Building Code of India 2016. Cheap ACP with an unrated core, fixed carelessly, is a false economy and a safety risk. Specify a fire-rated panel, a proper aluminium sub-frame, stainless fixings and correct joint detailing, and ACP is a sound, light, versatile cladding.

Why does a ventilated cavity matter?

The cavity behind rainscreen cladding does several jobs at once. Open joints let air into the gap and let any water that gets past the face drain down and out, while the moving air dries the cavity and the back of the panels, keeping the structural wall dry. The gap also lets the cladding expand and contract freely and buffers the wall from the sun's heat, carrying heat away before it reaches the structure. In the Indian climate this breathing, draining gap is what lets a facade cope with intense sun and heavy monsoon rain without staining, blistering or trapping damp in the wall.

How long does facade cladding last?

It depends heavily on the material, the fixing and the detailing. Natural stone and terracotta, properly dry-fixed on stainless anchors over a ventilated cavity, can last the life of the building with little attention. Good HPL and fire-rated ACP on a sound sub-frame last many years, fading or needing cleaning rather than replacement. The usual cause of early failure is not the panel but the fixing and the edges — mild-steel fixings that rust, or careless corners, reveals and copings where water gets in. A facade detailed for movement and water, with corrosion-resistant fixings, far outlasts one chosen on looks alone.

Sources & standards

  1. National Building Code of India 2016, Part 6 — Structural Design, and provisions for facade and fire safety
  2. Bureau of Indian Standards — IS codes for stone, cladding boards, aluminium and fixings, applied as relevant
  3. Neufert, Architects' Data — external wall construction, cladding and rainscreen principles
  4. Time-Saver Standards for Architectural Design — curtain walls and cladding systems
  5. Energy Conservation Building Code (ECBC), Bureau of Energy Efficiency — building envelope and shading
  6. Price ranges: indicative October 2026 estimates — confirm locally before budgeting
Discuss your project