← All articles

Architecture & Planning · 08 Nov 2026 · 21 min read

Site Analysis Before You Build: Sun, Wind, Slope and Access

Site Analysis Before You Build: Sun, Wind, Slope and Access — cover

Every piece of land has already decided a great deal before an architect arrives. The sun will rise in the east and set in the west whatever the drawing says. The monsoon wind will come from the same quarter it always has. The ground will shed water downhill. The road is where it is. A house that ignores these facts fights them for the rest of its life — rooms that overheat every afternoon, a courtyard that never catches a breeze, a plinth that sits in a puddle each monsoon, a drawing room that faces a blank boundary wall. A house that reads them first gets comfort almost for free.

This reading of the land is called site analysis, and it is the quiet first step that separates considered homes from copied ones. It costs almost nothing — a few visits at different times of day, a compass, a tape, a conversation with neighbours and the local authority — yet it shapes every decision that follows: which way the living room faces, where the bedrooms and services go, how high the plinth is raised, where the gate and parking sit, how the terrace drains. It is also the step most often skipped, because a builder's type plan can be dropped onto any plot and will technically stand up. Standing up and living well are different things.

This article sets out how to analyse a site the way designers do in India: the six inputs that matter most — sun, wind, slope, access, soil and water — what to record for each, and how the findings turn into orientation and layout. It covers the traditional wisdom that did this by instinct, the tools that do it today, and a buyer's checklist for anyone evaluating a plot before signing. The aim is a plan that is a reply to the land, not an argument with it.

How Indian builders read sites before instruments

Long before compasses and solar software, Indian building traditions encoded site reading into rules of thumb. Courtyard houses across Gujarat, Rajasthan and the south turned inward around an open space that pulled light and air into deep plans and vented hot air upward. Verandahs and deep eaves shaded walls from the low east and west sun. Thick masonry and small openings kept out heat in hot-dry regions, while raised floors and wide openings caught the breeze in hot-humid ones. Vastu, read practically, pointed in the same direction as climate: keeping heavy built mass towards the south and west, where the afternoon sun is harshest, and opening the north and east, where morning light is gentle and useful. The instruments are new; the questions are old.

Architects working in the modern Indian climate movement — among them Laurie Baker, who set his houses to the contours and the breeze rather than bulldozing the land flat — made the same point with evidence. A house tuned to its site needs less energy to stay comfortable, disturbs the ground less, and drains better. Site analysis is simply this instinct made deliberate and written down, so that it survives the gap between the person who visits the land and the person who draws the plan.

What to read: the six site inputs

A thorough site study records six things, and each one feeds a specific design decision. Missing any of them shows up later as a complaint. The table below lists what to record for each input, why it matters and the simple tool that captures it; none of it needs expensive equipment, only attention and more than one visit.

InputWhat to recordWhy it mattersSimple tool
SunNorth direction, sunrise/sunset line, shadows of neighboursDecides orientation of rooms and openingsCompass, visits at 9am/1pm/4pm
WindPrevailing breeze direction by season, obstructionsCross-ventilation, cooling, odour, dustAsk neighbours, watch flags and trees
SlopeHigh and low points, fall across the plot, water pathPlinth level, earthwork, drainage, split levelsLevels or a line level and tape
AccessRoad side and width, gate position, parking, approachEntry, setbacks, vehicle turning, servicesTape, look at the approach
SoilType (black cotton, sandy, rocky, filled), nearby cracksFoundation type and depth, costTrial pit, local borewell drillers
WaterWater table depth, drainage, nearby water bodies, floodingPlinth height, waterproofing, basement feasibilityNeighbours, borewell logs, monsoon visit

Sun: the one input that never changes

The sun is the most powerful site input because it is relentless and completely predictable. Across the latitudes of Indian cities — roughly 8°N in the far south to about 32°N in the north — the midday sun rides high overhead in summer, passing nearly vertical near the Tropic of Cancer around the June solstice, and swings lower into the southern sky in winter, sitting roughly 35° to 55° above the horizon at noon depending on how far north the site is. The practical consequences are the same everywhere in India: the south and west faces take the most heat, especially the low, glaring west sun of late afternoon; the east gets pleasant morning light that turns harsh by mid-morning in summer; and the north face receives little direct sun and therefore steady, even, cool light all day.

Fig. 1 — Sun path over a house (northern India, schematic) E morning summer noon — high W evening winter noon — low in south short noon shadow (N) South and west faces take the most heat; the low west evening sun is the harshest. Shade these with deep eaves, fins or screens. The north face gets little direct sun and gives steady, glare-free light — ideal for a study, studio or kitchen.
Fig. 1 — Sun path over an Indian plot: summer high, winter low, shadow to the north

These facts translate straight into orientation. Living and family rooms are happiest facing north or north-east, where they get gentle, even daylight without the afternoon heat. Bedrooms work well to the east (morning sun, cool evenings) or, with shading, to the south. The west is the problem direction: rooms there take the full force of the evening sun and run hot into the night, so it is best given to buffers — stairs, stores, toilets, a service passage, a double wall or a planted screen — rather than to a room where people sit. Kitchens are often placed to the east or south-east, which keeps them cooler in the evening and happens to align with a common Vastu preference. The table summarises how each orientation behaves in the Indian climate.

OrientationSun it receivesHeat loadBest used for
NorthLittle direct sun; steady lightLowLiving room, study, studio, kitchen
North-eastSoft morning sunLowLiving, entrance, verandah, pooja
EastPleasant morning sunLow–mediumBedrooms, breakfast area, balcony
South-eastMorning to midday sunMediumKitchen, dining, children's room
SouthHigh sun, strong in winterMedium–highLiving with shading, bedrooms with eaves
WestHarsh low evening sunHighStairs, stores, toilets, utility, buffers

Wind: cross-ventilation and cooler rooms

Air movement is the cheapest cooling a house has, and it is free if the plan is arranged to catch the prevailing breeze. Across much of India the dominant moist wind arrives from the south-west during the monsoon, while drier winds come from the north-west or north-east in winter; the exact pattern is local, which is why asking neighbours and watching which way trees lean and washing dries is part of the study. Once the breeze direction is known, cross-ventilation follows a simple rule: put openings on the windward side to let air in and on the opposite, leeward side to let it out, so a current flows through the room rather than stalling. A room with windows on only one wall barely ventilates at all.

Fig. 2 — Catching the breeze: inlet, outlet and courtyard SW breeze in warm air out courtyard hot air rises inlet sill 600–900 outlet higher Inlets face the breeze, outlets sit opposite and a little higher, so air flows through instead of stalling against one wall. A courtyard or a stairwell with a high vent works as a stack: hot air rises and escapes, pulling fresh air in below.
Fig. 2 — Cross-ventilation and a courtyard stack on a plan (mm sill heights)

Two further tricks raise the effect. Making the outlet opening a little larger or higher than the inlet speeds the flow, and placing a courtyard or a tall stairwell in the plan creates a stack effect — hot air rises and escapes through a high vent or skylight, drawing cooler air in at the bottom. This is exactly how the old courtyard house worked. Wind also carries what one would rather avoid: a plot downwind of a drain, a dump, a busy road or a factory should place its openings and outdoor sitting away from that quarter, and this is the kind of thing only a visit, not a brochure, reveals.

Slope, contours and drainage

Few plots are perfectly flat, and the way the ground falls decides how much earth must be moved, how high the plinth sits, whether split levels make sense, and — most importantly — where water goes. The golden rule is that the finished ground must slope away from the building on all sides, so that rain and surface water drain off rather than collecting against the plinth and walls. A plot that falls gently is often an advantage: it drains itself, allows a split-level plan that suits the land, and can give a basement or a stilt parking on the lower side almost for free. A plot that falls steeply, or one that is lower than the road so water runs towards it, needs careful plinth design and drainage and can mean significant earthwork cost.

Fig. 3 — Building platform cut into a falling site (mm) CUT FILL cut 500 fill 300 raised plinth drain away Balancing cut and fill keeps earthwork cheap; a retaining course holds the cut face and a drain carries water clear of the plinth.
Fig. 3 — Building on a slope: cut, fill, plinth and drainage (mm)

Designers describe slope as a percentage — the fall in height over a horizontal distance. The table gives rough bands and what each means for building. The numbers are a guide, not a rule, and local soil and drainage can shift them; a geotechnical or structural opinion is wise on anything steep.

SlopeHow it readsImplication for buildingUsual approach
0–3%Almost flatEasy to build; watch drainage so water is not trappedGrade gently away from the house
3–8%Gentle fallOften ideal; drains itself, suits split levelsBalance cut and fill, step the plan
8–15%Noticeable slopeRetaining and earthwork needed; stilt or basement on low sidePlatform cut, retaining walls, split levels
15–25%SteepSignificant cost; structural design essentialStepped structure, engineered retaining
Above 25%Very steepSpecialist design; stability is the main concernGeotechnical study, terracing, piers

Access, services and soil

The last three inputs are less visible but decide buildability and cost. Access means the side and width of the road the plot faces, which fixes the gate and often the front setback, and whether vehicles can turn in and park; a plot on a narrow lane or a steep approach limits both. Services means where the water line, electricity, drainage and sewer connect, because a plot far from a sewer may need a septic system, and a low plot may not drain into the municipal line by gravity. Soil decides the foundation: black cotton soil, common across much of central and western India, swells when wet and shrinks when dry and needs a foundation designed for that movement; sandy, filled or rocky ground each behave differently, and a simple trial pit plus a word with local borewell drillers tells most of the story before an engineer formalises it.

Trees, neighbours and views round out the picture. A mature tree is worth keeping for shade and should be located accurately on the survey; a neighbour's tall wall or building will throw a shadow that the sun study must account for; a good view is worth orienting a window towards, and a bad one worth screening. None of this appears on a title document, and all of it changes a plan. A thorough site plan brings every one of these onto a single drawing so the design can respond to the whole land at once.

For anyone evaluating a plot before buying, the same six inputs become a field checklist. Walking a plot with this list in hand turns a vague good feeling into a set of answers, and it often reveals a hidden cost — a low corner that floods, black cotton soil, a sewer that cannot be reached by gravity — that should change the price or the decision. The table below is that checklist, with the red flag to watch for in each line.

Check on siteWhat to confirmRed flag to watch for
OrientationRoad and plot faces; which rooms get the west sunOnly frontage is the hot west with no buffer depth
Levels and floodingPlot height versus road; where water drainsPlot lower than the road; monsoon water runs in
SoilTrial pit; ask drillers and neighboursBlack cotton or loose filled soil, nearby wall cracks
Water tableBorewell depth nearby; basement feasibilityWater table within a metre or two of the surface
Access and parkingRoad width, approach, turning, legal accessNarrow lane, steep approach, disputed access
ServicesWater, power, sewer and drainage connection pointsNo gravity drainage to the municipal line
Fig. 4 — Reading a plot on one drawing plot width N ROAD — front access BUILT ZONE mass to S / W open NE tree kept drain One drawing carries north, road and gate, built mass placed to the south and west, open space to the north-east, trees and drainage. With this in hand the plan becomes a reply to the land rather than a type drawing dropped onto it.
Fig. 4 — A composite site plan: orientation, access, zones and drainage (mm)

Where site analysis is going

The craft is being sharpened by cheap, accessible tools. Free sun-path calculators and phone apps show the exact angle and shadow for any date and location, so a designer can test overshadowing before building. Satellite imagery, contour data and GIS layers give slope, drainage and flood information for a plot that once needed a survey team. Climate data for Indian cities is increasingly available in the open, letting designers tune shading and ventilation to real temperature and wind records rather than rules of thumb, and simple energy and daylight simulations are moving within reach of ordinary practices. Rating systems such as GRIHA and IGBC reward exactly this kind of climate-responsive siting. None of it replaces standing on the land at four in the afternoon in May; the tools make the reading more precise, but the land still has to be visited to be understood.

Rules for reading a site before you build

  • Find true north first and mark it on every drawing; orientation is the decision everything else hangs on.
  • Visit the plot at least at morning and late afternoon, and once during or after rain, before finalising the plan.
  • Give the north and east to rooms people use; give the hot west to stairs, stores, toilets and buffers.
  • Put openings on opposite walls for cross-ventilation, with the outlet a little larger or higher than the inlet.
  • Make the finished ground slope away from the building on all sides and plan where surface water will go.
  • Balance cut and fill to keep earthwork cheap, and retain any cut face properly on a sloping plot.
  • Check the road side and width, the approach and parking, and where water, power and sewer connect.
  • Dig a trial pit and ask local drillers about soil and water table before assuming a foundation type.
  • Locate existing trees and neighbours' buildings and include their shadows in the sun study.
  • Confirm flood history, setbacks and services with neighbours and the local authority before buying.

Frequently asked questions

What is site analysis in simple terms?

Site analysis is reading a plot of land before designing on it — recording where the sun moves, which way the wind comes, how the ground slopes, where the road and services arrive, what the soil is and how water drains. The findings decide the orientation and layout of the house so it stays comfortable and drains well, instead of a standard plan being dropped onto the land regardless.

Which direction should a house face in India?

There is no single best direction; it depends on the room. Living rooms and studies are most comfortable facing north or north-east for steady, cool light; bedrooms suit the east for morning sun; and the hot west is best given to stairs, stores, toilets and utility areas that buffer the heat. North and east openings are generally favoured because they avoid the harsh afternoon sun, which also happens to align with common Vastu preferences.

How do I check the slope of a plot?

For a rough reading, stand at the highest and lowest points and note which way water would run; for an accurate one, use a line level and tape, a dumpy level or a surveyor to record the fall in height across the plot. Express it as a percentage — fall divided by horizontal distance. Up to about 8% is usually easy and even helpful for drainage; steeper than that means retaining walls, earthwork and structural attention.

Why does soil type matter before building?

Soil decides the foundation, which is one of the biggest hidden costs. Black cotton soil, found across much of central and western India, swells when wet and shrinks when dry, so it needs a foundation designed to cope with that movement; sandy, filled or rocky ground each behave differently. A simple trial pit and a conversation with local borewell drillers reveal most of the story, which a structural engineer then confirms before design.

Can site analysis lower building and running costs?

Yes, on both counts. Balancing cut and fill and matching the foundation to the real soil cut construction cost, while good orientation, shading and cross-ventilation cut the running cost of cooling for the life of the house. A home tuned to its site stays comfortable for more of the year without mechanical cooling, which is why climate-responsive siting is rewarded by green-building rating systems.

Sources & standards

  1. National Building Code of India 2016, Part 8 Building Services, Section 1 Lighting and Ventilation — daylight, orientation and natural ventilation guidance
  2. National Building Code of India 2016, Part 10 Landscape Development, Signs and Outdoor Display Structures — site planning and grading
  3. Bureau of Indian Standards — IS 1904 (design and construction of foundations) and IS 1498 (classification of soils) for site and soil assessment
  4. Energy Conservation Building Code (ECBC), Bureau of Energy Efficiency — climate-responsive orientation and envelope
  5. GRIHA and IGBC rating manuals — site selection, passive design and natural ventilation credits
  6. Ernst Neufert, Architects' Data, and Time-Saver Standards for Building Types — orientation, sun angles and site planning references
Discuss your project

Keep Reading

Related articles

All articles →