← All articles

Heights & Depths · 04 Nov 2026 · 26 min read

Standard Bed Sizes and Bedroom Clearances in India

Standard Bed Sizes and Bedroom Clearances in India — cover

The bed is the largest single piece of furniture in most Indian homes, and the one around which the whole bedroom is planned, yet it is often bought the wrong way round. A family sees a bed they like in a showroom, buy it by its showroom name — double, queen, king — and only discover at delivery that it leaves no room to open the wardrobe, or that one side is jammed hard against a wall, or that there is nowhere to walk to the window. The bed fits the floor but not the life around it. A bedroom works only when the bed is sized to the room, with the walking space, the wardrobe swing and the bedside tables all planned together, and that begins with knowing what the standard sizes actually are.

The confusion starts with the sizes themselves, because India uses several naming systems at once. The same bed is described in feet by a carpenter, in a brand name by a showroom, and in millimetres on an imported mattress, and the numbers do not always agree. Worse, people confuse the size of the mattress with the size of the cot — the bed frame — which is always larger, because it has side rails, a footboard and a headboard wrapped around the mattress. A queen mattress is 1500 × 2000 mm, but the queen cot that holds it can be 1650 mm wide or more, and it is the cot that has to fit the room and pass through the door. Planning a bedroom on the mattress figure alone is one of the commonest and most expensive mistakes.

The second half of the problem is clearance — the empty floor around the bed that nobody draws but everybody needs. A bed is not used only while lying in it; it is walked around, sat on to dress, made every morning, and reached past to open a wardrobe or a window. Each of those needs a band of clear floor, and when that floor is swallowed by too large a bed the room becomes a maze. This article sets out the standard bed sizes used in India, the difference between the mattress and the cot, the walking clearances a bed needs on every side, the extra room a wardrobe door or a chest of drawers demands, and the minimum bedroom sizes that follow from the National Building Code — so that the bed and the room are designed as one, not bought in the wrong order.

The four standard bed sizes in India

Indian bedrooms are furnished from four standard sizes, and almost every bed sold is one of them, whatever brand name is attached. A single bed carries a mattress of about 900 × 1900 mm — three feet by six and a quarter — and is the choice for a child, a single sleeper or a guest room; a slightly longer single of 900 × 2000 mm suits a tall person, and a wider single of 1000 mm is sometimes sold as a large single. A double bed takes a 1350 × 1900 mm mattress, roughly four and a half feet by six and a quarter, and is the compact two-adult size that fits a modest room. A queen is 1500 × 2000 mm, five feet by six and a half, and is the most popular master-bedroom size in Indian flats, comfortable for two without being vast. A king is 1800 × 2000 mm, six feet by six and a half, and needs a genuinely large room to carry it with the clearances it deserves.

These figures are the mattress sizes, and they are worth memorising because they anchor every other decision. The lengths cluster around 1900 to 2000 mm, so the main variable between sizes is width: 900, 1350, 1500 and 1800 mm. That progression — each size roughly a foot and a half, two feet, two and a half feet, three feet of width per sleeper — is the quickest way to picture how much bed a room can hold. A useful rule of thumb is that each adult needs about 750 mm of mattress width to sleep undisturbed; by that measure a double at 1350 mm gives two adults a tight 675 mm each, a queen a comfortable 750 mm each, and a king a generous 900 mm each. That single comparison explains why couples who can fit a queen rarely regret choosing it over a double.

Fig. 1 — Standard bed sizes compared (plan, mm) Single Double Queen King 900 × 1900 1350 × 1900 1500 × 2000 1800 × 2000 1800 2000 Mattress sizes shown. A single is 900 mm wide (1000 for a wide single); double 1350, queen 1500, king 1800 mm. Lengths run 1900–2000 mm. The cot frame is larger than the mattress — see the table that follows.
Fig. 1 — Standard bed sizes compared (plan, mm)
BedMattress size (mm)In feet (approx)Comfortably suits
Single900 × 19003 × 6.25 ftOne child or adult; a guest or study room
Single (long)900 × 20003 × 6.5 ftA tall single sleeper
Double1350 × 19004.5 × 6.25 ftTwo adults in a compact room
Queen1500 × 20005 × 6.5 ftMost master bedrooms; two adults
King1800 × 20006 × 6.5 ftLarge master bedrooms; a family sleeper

Mattress, cot and the measurement that gets confused

The single biggest source of error in planning a bedroom is treating the mattress size and the cot size as the same thing. The mattress is the soft part a person lies on, and its size — 900, 1350, 1500 or 1800 mm wide — is the standard figure quoted everywhere. The cot, or bed frame, is the structure that holds the mattress, and it is always larger, because it wraps the mattress in side rails, a footboard and usually a headboard. How much larger depends on the design: a plain platform bed with thin rails may add only 50 mm each side, while an upholstered bed with a padded headboard and chunky rails can add 100 to 150 mm on each side and a good 150 mm at the head. A queen mattress of 1500 × 2000 mm therefore sits in a cot that can occupy anywhere from 1600 × 2100 to 1700 × 2250 mm of floor.

This matters for three reasons. First, it is the cot, not the mattress, that must fit the room, so clearances must be measured from the cot's outer edge. Second, it is the cot that must travel from the street to the bedroom — through the building door, up the stairs or into the lift, round the landing and through the bedroom door — and a king cot that will not go up a narrow staircase is a well-known and costly surprise; a knock-down frame that dismantles is the usual answer. Third, the mattress must match the cot: an imported mattress sized in inches may be a few millimetres off an Indian cot, leaving a gap at the edge or a mattress that will not drop in. The safe practice is to fix the cot first, confirm its internal and external dimensions, and buy the mattress to suit it — and to confirm every doorway and turn on the delivery route before ordering a large bed.

BedMattress (mm)Typical cot / frame footprint (mm)Note
Single900 × 19001000 × 2000 to 1050 × 2050Frame adds side rails and headboard
Double1350 × 19001450 × 2000 to 1550 × 2100Allow extra for a padded headboard
Queen1500 × 20001600 × 2100 to 1700 × 2250Storage beds sit at the larger end
King1800 × 20001900 × 2100 to 2050 × 2250Check the door and lift can take it in

How bed sizes settled in India, and where they are going

The standard sizes used today are recent. For most of India's history people slept on the charpai — a woven cot of jute or cotton tape strung on a wooden frame — and on the takhat and diwan, low wooden platforms that served as seat by day and bed by night. These were made to no fixed size; a village carpenter built them to the timber and the household. The rolled-out mattress on the floor, easy to store and to add to when guests came, was and still is common, and it needs no standard size at all. The fixed-size bed with a bought mattress is a modern, urban arrival, and the single-double-queen-king vocabulary came with imported furniture and international mattress brands in the later twentieth century, settling into the four sizes now stocked everywhere.

Where bed design is going is driven by shrinking urban floor plans and the premium on storage. The storage bed — with drawers in the base, or a hydraulic lift-up platform that reveals the whole area under the mattress — has become the default in Indian flats, turning the dead space under the bed into a wardrobe's worth of storage; it adds height and a little footprint but earns its keep in a small home. Wall beds and foldaway Murphy beds, long common abroad, are appearing in studio flats and guest rooms that must double as something else by day. Adjustable beds, whose head and foot raise on a motor, are moving from hospitals into homes for comfort and for the elderly. What has not changed is the mattress module: the four standard widths remain the grid on which all of this is built, so knowing them stays the foundation of any bedroom plan.

Clearances around the bed

A bed needs clear floor around it to be usable, and the amount is well settled in practice. The side a person gets in and out of, and from which the bed is made, wants at least 700 to 750 mm of clear floor — enough to stand, turn and tuck a sheet. Where both long sides are used, each should have that clearance; where only one side is accessed, as against a wall, the other can have none, but then only one person can enter the bed comfortably. The foot of the bed wants about 600 to 700 mm to walk past and to make the bed. These are minimums for comfort, not luxuries: fall below about 600 mm on an access side and a person has to shuffle sideways, and making the bed becomes a daily contortion. Designers plan these clear bands first, around the cot's outer edge, and only then see what size of bed the room can truly hold.

The clearances interact with the room's doors and windows. A bedroom door should not swing into the clear band beside the bed, and a window a person needs to reach to open should have standing room in front of it. In a small room the honest move is to push one long side of the bed against a wall, accepting access from one side only, which frees a usable walking strip on the other — a common and sensible arrangement for a child's room or a guest room. For a couple's room, both sides should be accessible, because climbing over a partner to reach a wall-side of the bed wears thin quickly. The plan below shows the clear bands a double or queen bed needs when both sides are used.

Fig. 2 — Clearances around the bed (plan, mm) bed queen 1500 × 2000 ≥ 700 ≥ 700 ≥ 600 700–750 mm on the main access side; 600 mm at the foot and second side. Leave 700–750 mm on the side used to get in and make the bed, and 600–700 mm at the foot and second side. In a small room one long side can sit against a wall, giving access from the other side only.
Fig. 2 — Clearances around the bed (plan, mm)
WhereClearanceWhy
Main access side of the bed≥ 700–750 mmRoom to get in, out and make the bed
Second side (if used both sides)≥ 600–700 mmA person can pass and dress
Foot of the bed≥ 600–700 mmWalking past and making the bed
Side against a wall (small rooms)0 mm (no access)Only one long side then gives access
In front of a wardrobe (hinged)≥ 850–900 mmDoor leaf plus a person at the shelf
In front of a chest of drawers≥ 750 mmPull the drawer out and stand clear

Wardrobe swing and bedside clearances

The bed is not the only thing in the room, and the other pieces have clearances of their own that must not overlap the bed's. A wardrobe with hinged doors is the usual trap: when a door opens it swings a leaf of 450 to 600 mm out into the room, and a person then stands in front of that open door to reach the shelves, so a hinged wardrobe needs about 850 to 900 mm of clear floor in front — the door leaf plus a body. If that band falls across the side of the bed, the wardrobe cannot be used with the bed in place. A sliding-door wardrobe solves this completely, because its doors slide across the face and swing nothing into the room; in a tight bedroom a sliding wardrobe is almost always the right choice, and it is why sliding systems have largely replaced hinged ones in Indian flats.

A chest of drawers needs its drawers to pull out — commonly 450 to 550 mm — plus room for the person, so allow about 750 mm of clear floor in front. Bedside tables want to sit within easy reach of the pillow, their top near mattress height so a glass of water or a phone is to hand, and they should not block the walking band beside the bed — a table of 400 to 450 mm wide usually tucks into the clearance without stealing it. A dressing table with a stool needs the stool's pull-out space, around 600 mm, in front of it. None of these clearances is large, but they add up, and the reason a slightly smaller bed often makes a room feel bigger is that it leaves these bands unbroken, so every other piece of furniture can actually be used.

Fig. 3 — Wardrobe door swing and clearance (plan, mm) A — hinged doors B — sliding doors swing 450–600 ≥ 850–900 in front slides sideways 0 clearance needed A hinged wardrobe needs 850–900 mm clear in front for the open leaf and a person; a sliding door needs none. Allow about 750 mm in front of a chest of drawers to pull the drawer and stand clear.
Fig. 3 — Wardrobe door swing and clearance (plan, mm)

Minimum bedroom sizes to the National Building Code

Once the bed and its clearances are known, the minimum room size follows. The National Building Code of India 2016 sets the floor on habitable-room sizes: a habitable room must be at least about 9.5 square metres where a dwelling has a single room, and at least 7.5 square metres each where there are two or more rooms, with a minimum width of about 2.4 metres and a minimum height of 2.75 metres. These are legal minimums for a room to count as habitable, not recommendations for comfort, and a bedroom built to the bare minimum feels tight. In practice a single bedroom becomes comfortable at about 2400 × 3000 mm, a standard double bedroom at about 3000 × 3300 mm, and a master bedroom at about 3300 × 3900 mm or larger, which carries a queen or king bed with proper clearances, a wardrobe and a little seating.

The way to size a room is to add the bed footprint and its clearances in both directions. A queen cot of roughly 1650 × 2150 mm with a 750 mm access strip on each side needs about 1650 + 750 + 750 = 3150 mm across; with the headboard at the wall and a 700 mm strip at the foot it needs about 2150 + 700 = 2850 mm the other way — so a room of about 3150 × 2850 mm holds the bed alone, and a wardrobe along one wall pushes that towards 3300 × 3600 mm. A single bed of 1000 × 2000 mm against a wall, with one 750 mm access side, needs only about 1750 mm across, which is why a child's room works at 2400 mm wide. Reading the room this way, from the bed outward, is more reliable than any rule of thumb, and it is how a designer avoids the common fate of a bed that technically fits but leaves the room unusable.

Fig. 4 — Minimum bedroom layouts (plans, mm) 2400 3300 3000 3900 single queen wardrobe wardrobe single · 2400 × 3000 · ≈ 7.2 m² master · 3300 × 3900 · ≈ 12.9 m² The National Building Code sets a habitable room at ≥ 9.5 m² (one room) or 7.5 m² each where two or more, min 2.4 m wide. A single bedroom works at about 2400 × 3000 mm; a master wants 3300 × 3900 mm or more for a queen or king bed.
Fig. 4 — Minimum bedroom layouts (plans, mm)
RoomComfortable size (mm)Floor areaFits
Single bedroom2400 × 3000≈ 7.2 m²Single bed, small wardrobe, desk
Standard double bedroom3000 × 3300≈ 9.9 m²Double or queen bed and wardrobe
Master bedroom3300 × 3900≈ 12.9 m²Queen or king bed, wardrobe, seating
NBC minimum habitable room≥ 2400 mm wide≥ 9.5 m² (one room)7.5 m² each where two or more rooms

Choosing and costing a bed for the room

Choosing a bed size is a negotiation between the sleepers and the room. A couple is most comfortable in a queen, and in a king if the room can carry it; a king in a room that cannot leaves no walking space and is a false luxury. A single child grows, so a 900 × 1900 mm single with a longer 2000 mm option is the safe choice, and two children sharing often do better with two singles than one shared bed. A guest room that is used occasionally is well served by a double or a sofa-cum-bed that frees the room between visits. The honest sequence is to measure the room, subtract the clearances and the wardrobe's band, and let the remaining rectangle decide the largest bed that fits — rather than buying the bed first and hoping. Aaditya Interior advises clients to spend on the mattress and the clearance before the frame's decoration, because a good mattress and room to move are what the body feels every night.

Costs vary widely with material, mechanism and finish. A ready-made double or queen frame in engineered board runs at a modest figure; a solid-wood or designer king climbs quickly; a hydraulic storage bed adds the cost of its lift mechanism but returns a wardrobe's worth of storage. A built-in platform or storage bed, made by a carpenter or a modular brand, is priced much like a wardrobe, per square foot of its plan area. The mattress is a separate and significant cost, ranging from a basic foam sheet to a high-end spring or latex mattress, and is the one item worth not economising on. The figures below are indicative October 2026 ranges and vary by city, board grade, hardware and finish; they should be confirmed locally before budgeting. Aaditya Interior generally sets the bed and mattress budget first in a bedroom, because they are used longest and hardest, and trims the decorative joinery around them if the budget is tight.

ItemIndicative Oct 2026 costNote
Ready-made double or queen frame₹12,000–45,000Engineered board to solid wood
King frame (solid wood / designer)₹30,000–1,20,000Rises fast with wood and finish
Hydraulic storage bed (queen)₹25,000–70,000Lift-up base for storage
Built-in platform / storage bed₹1,400–2,400 per sq ftBWR ply and laminate, by plan area
Mattress (queen)₹8,000–55,000Foam, spring or latex, by type
Upholstered headboard₹1,500–4,000 per running ftFabric or leatherette finish

Rules for sizing a bed and its room

  • Memorise the four mattress sizes: single 900 × 1900, double 1350 × 1900, queen 1500 × 2000, king 1800 × 2000 mm.
  • Plan from the cot, not the mattress — the frame is 50–150 mm larger on each side and is what fits the room.
  • Allow each adult about 750 mm of mattress width; a queen gives two adults comfort, a double is tight.
  • Leave 700–750 mm clear on the main access side and 600–700 mm at the foot and any second access side.
  • Give a hinged wardrobe 850–900 mm clear in front, or choose sliding doors that need no swing space.
  • Allow about 750 mm in front of a chest of drawers and 600 mm for a dressing-table stool.
  • Size the room from the bed outward: add the cot footprint and its clearances in both directions.
  • Keep a single bedroom at least 2400 × 3000 mm and a master at about 3300 × 3900 mm for a queen or king.
  • Confirm every doorway, stair turn and lift on the delivery route before ordering a large or king bed.
  • Spend on the mattress and the clearance before the frame's decoration — they are what the body feels nightly.

Frequently asked questions

What is the standard queen size bed in India?

A queen mattress in India is 1500 × 2000 mm — about five feet by six and a half feet. It is the most popular master-bedroom size, giving two adults about 750 mm of width each. The queen cot that holds it is larger, commonly 1600 to 1700 mm wide and 2100 to 2250 mm long once the rails and headboard are added, and it is that cot size that must fit the room and pass through the doorway.

What is the difference between a king and a queen bed?

A king mattress is 1800 × 2000 mm and a queen is 1500 × 2000 mm, so a king is 300 mm — about a foot — wider, while both are the same length. A king gives two adults a generous 900 mm of width each against the queen's 750 mm, but it needs a larger room to keep the walking clearances, so a king suits a master bedroom of about 3300 × 3900 mm or more. In a smaller room a queen with proper clearance is more comfortable than a king with none.

How much space do you need to walk around a bed?

Allow at least 700 to 750 mm of clear floor on the side used to get in and out and to make the bed, and 600 to 700 mm at the foot and any second access side. Below about 600 mm a person has to shuffle sideways and making the bed becomes awkward. In a small room one long side can be pushed against a wall, giving access from the other side only, which is fine for a child's or guest room but not ideal for a couple.

What is the minimum size of a bedroom in India?

The National Building Code of India 2016 requires a habitable room to be at least about 9.5 square metres where a home has a single room, and at least 7.5 square metres each where there are two or more rooms, with a minimum width of about 2.4 metres and a height of 2.75 metres. These are legal minimums; for comfort a single bedroom works at about 2400 × 3000 mm and a master at about 3300 × 3900 mm. The local building bye-laws govern the exact figures, so confirm them for a given project.

Is the bed frame the same size as the mattress?

No. The mattress size — 900, 1350, 1500 or 1800 mm wide — is the figure quoted for a bed, but the cot or frame is always larger because it wraps the mattress in side rails and a headboard, adding roughly 50 to 150 mm on each side depending on the design. Always plan the room and check the delivery route against the cot's outer dimensions, not the mattress, and buy the mattress to suit the chosen cot so there is no gap at the edge.

Sources & standards

  1. National Building Code of India 2016, Part 3 (Development Control Rules and General Building Requirements) — minimum size, width and height of habitable rooms
  2. Neufert, Architects' Data — standard bed and mattress sizes, bedroom furniture dimensions and circulation clearances
  3. Time-Saver Standards for Interior Design and Space Planning — bedroom layouts and clearances around beds and wardrobes
  4. Bureau of Indian Standards — IS 303 (plywood for general purposes) and IS 710 (marine / BWP plywood) for board grades used in bed frames and platform beds
  5. Indian mattress and furniture trade — common single, double, queen and king sizes as stocked by major manufacturers, described generically
  6. Price ranges: indicative October 2026 estimates — confirm locally before budgeting
Discuss your project