A wardrobe is judged from the outside — the finish of its shutters, the handles, the way it lines up with the room — but it succeeds or fails on its insides. A beautifully finished wardrobe whose single hanging rail is set too low to clear long kurtas, whose shelves are too deep to reach the back of, or whose drawers are too shallow for folded clothes, is a daily irritation dressed as a feature. The internal dimensions of a wardrobe are not glamorous, but they are what decide whether a family's clothes actually fit and are actually reachable. Get the depth, the rod heights and the shelf sizes right, and an ordinary wardrobe holds far more and frustrates far less than a grand one planned badly.
The reason internals go wrong is that they are usually left to the carpenter to improvise on site, long after the shutters and the elevation have been decided. The visible face is designed with care; the inside is a guess. Yet the inside follows firm figures: a hanging garment needs a known depth and a known drop, a shelf of folded clothes a known height, a drawer a known clearance. These figures come from the clothes themselves and from the reach of the human arm, and they are as fixed as the dimensions of a staircase. A wardrobe planned from the inside out — zoned by what it must store, with each zone sized to its contents — works; one planned from the shutters in, with the insides fitted afterwards, wastes space in some places and runs short in others.
This article sets out the standard internal dimensions and the planning logic of a wardrobe for Indian homes: the near-universal 600-millimetre depth and where it comes from, the hanging rod heights for long and short garments, shelf and drawer sizes, how to divide a wardrobe into zones by contents, and how hinged and sliding shutters change the internal rules. It gives indicative October 2026 costs, a rules checklist and the questions people most often ask. The figures are the common trade dimensions and ergonomic values of Indian joinery, given as ranges, so they can be used directly when briefing a designer or a carpenter and checked against a quotation.
Why 600 millimetres: the depth that governs everything
The single most important internal dimension of a wardrobe is its depth, and the standard is about 600 millimetres (finished internal, a little more externally with the shutter). This figure is not arbitrary; it is set by the width of a clothes hanger. An adult garment on a hanger occupies about 500 to 550 millimetres across the shoulders, and the hanger hangs from a rail running front to back only if the wardrobe is deep enough to clear it — so a wardrobe with the rail running the usual way, parallel to the shutters, needs about 600 millimetres of depth for the garment to hang square without the shoulders pressing against the back or the shutter. Less than 550 millimetres and coats and jackets crush at the shoulders; much more than 600 and the extra depth is wasted, because the clothes still hang at the front and the back becomes an unreachable void.
The depth changes in two situations. In a shallow space where 600 millimetres cannot be found, the rail can be turned to run front-to-back on a pull-out valet rod, letting a wardrobe work at 350 to 400 millimetres deep, though it holds far fewer garments. And in a sliding-shutter wardrobe the external depth grows, because the track and the overlapping panels add 80 to 100 millimetres in front of the 600-millimetre internal carcass, so a sliding wardrobe is typically 650 to 700 millimetres deep overall against a hinged wardrobe's 600 to 620. This is why a sliding wardrobe eats more of the room's depth for the same internal storage — a trade-off against its advantage of needing no door-swing clearance in front.
Hanging rods: heights and drops
Hanging space is divided by the length of what hangs in it, and this is where a wardrobe most often wastes room. Long garments — full-length kurtas, sarees on a saree rod, coats, long dresses — need a hanging drop of about 1500 to 1700 millimetres from the rail to the shelf or floor of the section below, so the rail sits high, around 1800 to 2000 millimetres above the floor. Short garments — shirts, folded trousers on a trouser rail, tops, kurtis — need only about 900 to 1100 millimetres of drop, which means two short-hanging sections can be stacked one above the other in the height one long section occupies, roughly doubling the hanging capacity. A wardrobe given over entirely to long-drop rails, when most of the family's clothes are short, throws away half its hanging space to empty air beneath the shirts.
The rail itself has dimensions. It is set back about 50 to 60 millimetres from the front edge so garments do not foul the shutter, and about 40 to 50 millimetres below the shelf above it so the hangers lift off easily. The reachable height matters too: a rail above about 2000 millimetres needs a step or a pull-down rail to reach, so the highest long-hang rail is kept within comfortable reach or fitted with a wardrobe lift. The practical plan is to mix the two: a tall section for the few long garments, and the rest of the hanging space doubled up as two short-hang tiers, with the most-used clothes at the easy middle height between about 900 and 1700 millimetres — the zone the arm reaches without bending or stretching.
| Hanging type | Drop needed (mm) | Rail height above floor (mm) | Holds |
|---|---|---|---|
| Long hang (single) | 1500–1700 | 1800–2000 | Kurtas, coats, long dresses, sarees |
| Short hang (single) | 900–1100 | 1100–1200 or 2000–2100 | Shirts, tops, kurtis, trousers |
| Double short hang (two tiers) | 2 x 900–1100 | Lower ≈ 1050; upper ≈ 2000 | Twice the short-garment capacity |
| Trouser pull-out rail | Per rail design | Within easy reach | Folded trousers, hung flat |
| Saree rod (pull-out) | 1500–1700 | High section | Sarees hung full length |
Shelves, drawers and their clearances
Folded clothes live on shelves, and a shelf has an ideal height for its contents. A shelf spacing of about 300 to 350 millimetres suits a stack of folded shirts or t-shirts; 350 to 400 millimetres suits bulkier folded items like jeans and sweaters; and a tall 400 to 450 millimetre shelf takes bedding, blankets and bags. A shelf much taller than 450 millimetres wastes height in air above the stack, while one shorter than 250 millimetres forces clothes to be squashed. Shelf depth matches the wardrobe at about 550 to 580 millimetres, but a shelf deeper than about 450 millimetres becomes hard to use at the back, so deep shelves are best reserved for things reached rarely — off-season bedding at the top. Adjustable shelves, sitting on pin supports, let the spacing be tuned to the contents and changed later, and are worth the small extra cost over fixed shelves.
Drawers hold the small and the foldable — innerwear, socks, folded t-shirts, accessories — and their internal clear depth (the height inside the drawer box) is the figure that matters: about 100 to 150 millimetres for shallow drawers of innerwear and socks, 150 to 200 millimetres for folded clothes, and 200 to 250 millimetres for bulky items. Drawers run on channels that need the carcass to be a few millimetres wider than the drawer box each side, and a soft-close channel adds a little depth at the back, so the clear internal width is always less than the compartment. Drawers are best placed at the easy middle height, between about 600 and 1200 millimetres, where they are seen into from above without bending — a drawer near the floor is used by feel, and a drawer above eye level cannot be seen into at all. A lockable drawer or a concealed one for documents and valuables is a common and sensible addition.
| Shelf contents | Shelf spacing (mm) | Note |
|---|---|---|
| Folded shirts / t-shirts | 300–350 | The common stack height |
| Jeans / sweaters (bulky) | 350–400 | Taller folds need more room |
| Bedding / blankets / bags | 400–450 | Deep top and loft shelves |
| Shoes (per pair, on a rack) | 150–200 | Low zone, reached by bending |
| Drawer contents | Clear internal depth (mm) | Best drawer height (mm) |
|---|---|---|
| Innerwear, socks | 100–150 | 600–1200 |
| Folded clothes | 150–200 | 600–1200 |
| Bulky items / jeans | 200–250 | 600–1000 |
| Accessories / valuables | 100–150 | Lockable, within easy reach |
Planning a wardrobe by zones
A well-planned wardrobe is divided into zones, each sized to what it holds and placed at the right height for how often it is used. From the floor up, the usual arrangement is: a low zone (floor to about 600 millimetres) for shoe racks, heavy boxes and pull-out baskets, reached by bending; the prime zone (about 600 to 1700 millimetres) for everything used daily — short-hang shirts, drawers, open shelves — at the height the arm reaches without stretching or bending; a high-hang or long-hang zone (up to about 2000 millimetres) for long garments and less-used hanging; and a loft above about 2000 millimetres, a deep upper compartment for suitcases, off-season quilts and rarely touched boxes, reached with a step. Putting daily clothes in the prime zone and banishing the once-a-year items to the loft and the floor is the single planning move that makes a wardrobe pleasant to use.
The width of the wardrobe is divided into bays, each typically 450 to 900 millimetres wide, and the internal layout is planned bay by bay: one bay of long hang, two bays of double short hang, one bay of shelves and drawers, and so on, mixed to the family's actual clothes. A couple's wardrobe is often split down the middle, his and hers, each zoned to its own mix. The honest way to plan is to count the clothes — how many long garments, how many shirts, how many folded stacks, how many pairs of shoes — and size the zones to that count, rather than filling the wardrobe with hanging rails by default. A chest of drawers or a dresser unit within the wardrobe run adds folded and small-item storage that hanging cannot. Aaditya Interior's designers plan these internals at the drawing stage, zoned to the client's wardrobe audit, rather than leaving them to the carpenter to improvise once the shutters are up.
Hinged versus sliding: how the shutter changes the plan
The choice of shutter reaches inside the wardrobe and changes how it must be planned. A hinged wardrobe opens its shutters outward, so it needs about 600 millimetres of clear floor in front for the doors to swing, but in return every bay is fully open at once and the internal depth stays at a tight 600 millimetres. It is the cheaper and more space-efficient option internally, and it suits rooms where there is room to swing a door. A sliding wardrobe's panels slide past one another on a track, so it needs no swing clearance in front — its great advantage in a narrow bedroom where a hinged door would hit the bed — but the track adds 80 to 100 millimetres to the depth and, crucially, only half the wardrobe is open at any time because one panel always sits in front of another. Internal planning must account for that: frequently used zones are split so that each sliding panel reveals a usable set.
The cost follows the mechanism. In indicative October 2026 terms, wardrobes are priced per square foot of elevation (the shutter-face area): a hinged wardrobe runs about ₹1,200-1,800 per sq ft and a sliding one about ₹1,800-3,000, the premium going to the track, the wider panels and the deeper carcass. Across specification bands, a budget wardrobe in a particle-board or commercial-ply carcass with laminate shutters sits at ₹750-1,200, a mid-range BWR-ply carcass with branded laminate and soft-close hardware at ₹1,200-2,200, and a premium BWP-ply carcass with acrylic or PU finish and top-brand hardware at ₹2,200-3,500. A soft-close hardware upgrade adds roughly ₹5,000-15,000 per wardrobe. The carcass is best in BWR plywood (IS 303) for a lasting wardrobe, with the finish chosen for the room; these are confirmed-locally ranges, as they move with board, finish, hardware and city.
| Specification (per sq ft of elevation, finished) | Indicative Oct 2026 cost | What it includes |
|---|---|---|
| Budget — particle/commercial ply, laminate | ₹750–1,200 | Basic carcass and hardware |
| Mid-range — BWR ply, branded laminate, soft-close | ₹1,200–2,200 | The standard fitted wardrobe |
| Premium — BWP ply, acrylic/PU, top-brand hardware | ₹2,200–3,500 | Designer finishes, profile lighting |
| Hinged wardrobe (all-in typical) | ₹1,200–1,800 | Full access; needs door-swing clearance |
| Sliding wardrobe (all-in typical) | ₹1,800–3,000 | No swing; deeper carcass; half open at once |
| Soft-close hardware upgrade | + ₹5,000–15,000 per wardrobe | Branded hinges, channels and baskets |
Where wardrobe planning is heading
Wardrobe design in India is moving towards fitted, floor-to-ceiling storage planned as part of the room rather than free-standing furniture bought separately. The walk-in wardrobe and the dressing room, once a luxury, are appearing in mid-market homes wherever a spare corner or a passage allows, planned with the same internal logic at a larger scale. Internally, accessories are multiplying — pull-out trouser and tie racks, soft-close drawers with dividers, pull-down hanging rails that bring a high rod within reach, integrated LED profile lighting that switches on when a shutter opens, and valet rods — all of which are really ways of putting the right dimension at the right height. Handle-less and flush shutters, and sliding systems with slimmer tracks, are refining the outside. But the internals remain governed by the clothes and the arm: a hanger still needs 600 millimetres of depth, a long garment still needs its 1500-millimetre drop, and daily clothes still belong in the prime reach zone. Those figures will outlast every finish trend.
Ten rules for planning a wardrobe
- Plan the inside from the clothes out — audit what the family owns before fixing the shutters.
- Keep the internal depth at about 600 mm so a hanger clears square; turn the rail for a shallow 350-400 mm wardrobe.
- Give long garments a 1500-1700 mm drop and stack short-hang clothes in two tiers to double the hanging capacity.
- Put daily clothes in the prime 600-1700 mm reach zone, off-season items in the loft and floor.
- Size shelf spacing to the contents — 300-350 mm for shirts, 350-400 for jeans, 400-450 for bedding.
- Keep shelves no deeper than about 450 mm for daily use, and reserve deeper shelves for rarely reached items.
- Place drawers at 600-1200 mm so they are seen into from above, and size the clear depth to the contents.
- Choose hinged shutters where there is 600 mm of swing room, and sliding where the room is too tight for a door.
- Remember a sliding wardrobe is deeper (650-700 mm) and opens only half at a time — split the zones to suit.
- Build the carcass in BWR plywood for a lasting wardrobe, and choose the shutter finish by the room.
Frequently asked questions
What is the standard depth of a wardrobe?
A wardrobe is about 600 millimetres deep internally, because an adult garment on a hanger needs that depth to hang square without crushing at the shoulders. A sliding wardrobe is a little deeper at 650 to 700 millimetres overall because the track and overlapping panels add 80 to 100 millimetres in front. Where 600 millimetres cannot be found, a wardrobe can work at 350 to 400 millimetres with the rail turned front-to-back on a pull-out valet rod, though it holds far fewer clothes.
What is the correct height for a wardrobe hanging rod?
For long garments that need a 1500 to 1700 millimetre drop — kurtas, coats, long dresses, sarees — the rail sits high at about 1800 to 2000 millimetres above the floor. Short garments like shirts need only a 900 to 1100 millimetre drop, so two short-hang rails can be stacked, with the lower at about 1050 millimetres and the upper near 2000. Keep the highest rail within comfortable reach or fit a pull-down rail.
How do you plan the inside of a wardrobe?
Plan it in zones by what it stores and how often: shoes and heavy boxes in a low zone to about 600 millimetres, daily clothes in the prime zone from 600 to 1700 millimetres, long hanging up to about 2000 millimetres, and off-season items in a loft above 2000. Count the family's clothes first — long garments, shirts, folded stacks, shoes — and size the zones to that count rather than filling the wardrobe with hanging rails by default.
Is a sliding or hinged wardrobe better?
A hinged wardrobe is cheaper, keeps a tight 600-millimetre depth and opens every bay at once, but it needs about 600 millimetres of clear floor in front for the doors to swing. A sliding wardrobe needs no swing clearance — ideal in a narrow bedroom where a door would hit the bed — but it is deeper at 650 to 700 millimetres and only half of it is open at any time. Choose hinged where there is room to swing a door, and sliding where there is not.
What should a wardrobe carcass be made of?
BWR plywood (IS 303) is the sound choice for a wardrobe carcass, because it holds screws, bears the load of laden shelves and tolerates bedroom humidity, listing at about ₹90 to 130 per square foot for 18-millimetre board. Particle board is cheaper but sags under a loaded shelf and fails if it ever gets wet. It is better to spend on the carcass and choose the shutter finish by the room than the other way round.
Sources & standards
- Ernst Neufert, Architects' Data — wardrobe depths, hanging rod heights, shelf and drawer dimensions and human reach zones
- Time-Saver Standards for Interior Design and Space Planning — storage furniture dimensions and reach geometry
- Bureau of Indian Standards — IS 303 (plywood for general purposes, BWR grade) for carcass board
- Modular furniture and fitted-wardrobe trade standard sizes and hardware dimensions (generic manufacturer ranges)
- Garment and hanger dimensions for hanging and folded clothing storage (generic ranges)
- Price ranges: indicative October 2026 estimates — confirm locally before budgeting




