Drawings don't build homes; people do. And people – even excellent contractors – need a second pair of eyes. That is why site supervision is built into every Aaditya Interior project, not sold as an add-on.
Here is what our supervisors actually check on a visit, and why each item made the list:
1. Levels and lines
False ceilings, wall panelling and flooring are checked against level lines before finishes go on. A 5 mm slope in a ceiling is invisible until the cove light goes in – and then it is all you see. Catching it early costs nothing; fixing it later costs a ceiling.
2. Electrical and plumbing points
Switch positions, light points and plumbing outlets are verified against the approved drawings before walls are closed. Moving a switch after painting means cutting, patching and repainting – a week's delay for a ten-minute check.
3. Joinery and hardware
Shutter alignment, hinge quality, drawer runners and handle positions. We open and close everything. Hardware is touched a hundred times a day; it has to feel right from day one.
4. Finish quality
Paint edges, polish uniformity, grout lines, silicone joints. We look at the work the way evening light will look at it – raking across surfaces, honest about every undulation.
5. Safety and site discipline
Material stacking, electrical safety, dust protection for finished areas. A disciplined site finishes faster and damages less – which is also why our projects hand over on cleaner timelines.
The cheapest site visit is the one that prevents the most expensive rework.
None of this is glamorous. But after 1200+ projects, I can tell you: the homes clients love most are rarely the most expensive ones. They are the ones where somebody checked.
