The most dangerous moment in an interior project is not during the work; it is the day after handover, when the money is paid and the attention moves on. A hinge begins to sag, a laminate edge lifts, a tap drips, a false-ceiling joint cracks with the first season's temperature swing — and the question nobody settled becomes urgent: who fixes this, for how long, and at whose cost? In India this is too often answered by a cheerful "lifetime warranty" promised verbally and written nowhere, which turns out to mean nothing the moment it is tested.
A warranty is only as good as three things: what it actually covers, how long it runs, and whether the party who gave it is still reachable and solvent when it is needed. A promise from a one-man contractor who disappears after payment is not a warranty; a written, specific commitment from an established studio, backed by the product warranties of named brands, is. The gap between the two is where most post-handover misery lives, and it is entirely avoidable by reading, before signing, what the warranty and the maintenance arrangement really say.
This article untangles the subject. It separates the workmanship warranty the contractor gives from the product warranties the manufacturers give, explains the defect liability period and the snagging process at handover, sets out how long the parts of an interior realistically last, and explains what an annual maintenance contract is and when it is worth taking. The aim is that a client knows, before the final payment, exactly what protection they are buying and what they will have to maintain themselves.
Two different warranties, often confused
Every interior carries two kinds of warranty that clients routinely merge into one. The first is the workmanship warranty: the contractor or studio's own promise that the work they did — the carpentry, the fixing, the finishing, the ceiling, the on-site assembly — is free of defects for a stated period, and that they will put right anything that fails through their fault. The second is the product warranty: the manufacturer's promise on a bought component — a hinge brand's warranty on its soft-close mechanism, a laminate maker's on delamination, a tap brand's on its cartridge, an appliance maker's on a chimney motor. These run for different periods, are claimed from different parties, and cover different failures.
The distinction decides who a client calls when something fails. A sagging drawer runner is usually a product matter, claimed on the hardware brand's warranty; a drawer box coming apart at the joint is usually workmanship, claimed on the studio. A good handover file makes this navigable by listing, for every major component, which brand was used and what its warranty is, alongside the studio's own workmanship commitment. Without that file, every failure becomes an argument about whose problem it is, and the client — holding neither the brand paperwork nor a written workmanship term — tends to lose.
The defect liability period and snagging
Between handover and the end of the warranty sits the defect liability period — the window, borrowed from construction contracts, during which the contractor must return and fix defects that appear in normal use at no extra charge. For interiors this is commonly set at six to twelve months in a written agreement, long enough to catch the faults that only show up with use and a change of season: the door that drops, the joint that cracks when the air-conditioning first runs, the drawer that binds in the monsoon. A client who signs an agreement should look for this clause; its absence means every post-handover fix is a negotiation.
The gateway to all of this is snagging — the handover inspection where client and studio walk the finished space together and list every defect, incomplete item and finish flaw on a snag list, which the studio then clears before final payment or within an agreed time. A proper snagging is unhurried and ruthless: every door opened, every drawer run, every tap turned, every light switched, every surface checked in daylight. The snag list, signed and dated, becomes the baseline of what was handed over in good order, and anything on it that is not fixed remains the studio's responsibility. Skipping snagging to get the keys faster is how clients inherit faults they later cannot prove were there at handover.
A snagging walk-through, room by room
Snagging is a method, not a glance, and doing it well is the single most valuable hour a client spends on the whole project. The walk-through goes room by room with a written list, and nothing is trusted to look right — every element is operated. In the kitchen, every shutter and drawer is opened and closed, the soft-close checked, the counter run for level, the sink filled and drained, the chimney switched on, and the gaps under the units checked for a clean finish. In wardrobes, every hinge, every drawer, every lock and every shelf is tested, and the loft shutters checked for alignment. The point is to find the faults now, while the studio is still present and still owed money, rather than after both have gone.
Wet areas and services deserve the most patience because their faults are the costliest to fix later. In bathrooms, taps are run hot and cold, the flush tested, the floor checked for fall towards the drain by pouring water, and the waterproofing trusted only after a flood test where practical. Across the home, every switch, socket and light is operated, the false-ceiling joints checked in raking daylight for hairline cracks, the paint checked for roller marks and patchiness, and every door checked for a clean swing that does not foul a switchboard or a handle. Each defect goes on the snag list with its location, and the list is signed and dated by both sides so that what was agreed is beyond dispute.
| Area | Snag-check | Common defect found |
|---|---|---|
| Kitchen | Run every shutter, drawer, soft-close | Misaligned shutters, weak soft-close |
| Wardrobes | Test hinges, drawers, locks, shelves | Drawer bind, loft shutter gaps |
| Bathrooms | Run taps, flush, check floor fall | Standing water, loose fittings |
| Electrical | Operate every switch, socket, light | Dead point, wrong switching |
| False ceiling | Check joints in raking light | Hairline cracks at joints |
| Paint and finish | Check walls in daylight | Roller marks, patchy coverage |
| Doors and handles | Swing every door fully | Foul against switchboard, drop |
How long an interior actually lasts
A warranty period and a service life are not the same thing. A warranty covers early failure; the service life is how long a part keeps working with normal care. Reading both together tells a client what to expect. The ranges below are typical service lives under ordinary Indian home use with reasonable maintenance; harsh use, water exposure or poor installation shorten them, and good care extends them. They are a planning guide, not a guarantee, and the warranty on any specific item is whatever its maker and the studio put in writing.
| Interior element | Typical service life | Common warranty | What usually fails first |
|---|---|---|---|
| Modular carcass (BWR ply) | 15–20 years | Studio: 1–10 yr (written) | Edge-banding, if unsealed |
| Hinges and soft-close | 8–12 years | Brand: often several years | The damping mechanism |
| Drawer runners (telescopic) | 8–12 years | Brand warranty | Smoothness, then binding |
| Laminate finish | 10–15 years | Brand: against delamination | Edges and high-touch corners |
| PU / acrylic shutter finish | 8–12 years | Studio / applicator | Scratches, gloss dulling |
| False ceiling (gypsum) | 10–15 years | Studio workmanship | Joint cracks, then sagging if damp |
| Tap and sanitary fittings | 8–15 years | Brand: often long on body | Cartridge, then finish |
The pattern across the table is consistent: the structure outlasts the moving parts and the finishes. Carcasses and ceilings last well; it is the hardware, the finish edges and the cartridges that wear first, and those are mostly product-warranty items replaceable without rebuilding anything. This is why the brand of hinge and runner matters more than clients expect — not for the first year, when everything works, but for the eighth, when a good brand's mechanism is still smooth and still available as a spare.
The annual maintenance contract
An annual maintenance contract, or AMC, is a separate agreement under which a studio or specialist returns at set intervals to service the interior — tightening and adjusting hardware, realigning doors and drawers, touching up finishes, checking seals and joints, and attending to small faults before they become big ones. It picks up where the warranty's defect liability leaves off, and it suits interiors with a lot of moving and serviceable parts: large modular kitchens, extensive wardrobes, motorised or automated fittings, and commercial fit-outs where downtime costs money. For a modest flat with simple joinery, an AMC may be unnecessary; for a kitchen full of mechanisms, it often pays for itself.
An AMC is worth only what its scope says. The key questions are what is included, how many visits a year, whether parts and consumables are extra, how fast a call-out is attended, and what is excluded. A contract that promises visits but charges for every part, or that excludes exactly the mechanisms most likely to fail, protects the provider more than the client. As indicative October 2026 figures to confirm locally, residential interior AMCs commonly run a few thousand rupees to the low tens of thousands a year depending on the size and complexity of the home and whether parts are included; larger or commercial contracts run higher. The number matters less than the scope behind it.
| AMC question | Good sign | Warning sign |
|---|---|---|
| What is covered? | Named items and mechanisms listed | Vague 'general maintenance' |
| Visits per year | Stated number (e.g. 2–4) | 'As required', undefined |
| Parts and consumables | Included or clearly priced | Silent — billed later |
| Response time for a fault | Stated in days | No commitment |
| Exclusions | Short and specific | Long, or hides key parts |
| Who performs the work | The studio or a named firm | Unnamed third party |
| Symptom | Usually | Claim from | Who fixes it |
|---|---|---|---|
| Soft-close stopped damping | Product | Hardware brand | Studio or brand service |
| Drawer box coming apart | Workmanship | Studio warranty | Studio |
| Laminate edge lifting | Workmanship | Studio warranty | Studio |
| Tap cartridge dripping | Product | Tap brand | Plumber under brand warranty |
| Ceiling joint crack | Workmanship | Studio warranty | Studio |
| Chimney motor failed | Product | Appliance brand | Brand service |
Making a warranty actually enforceable
A warranty that cannot be proved is not a warranty. What makes one enforceable is paperwork handed over on the day the keys change hands: the signed agreement with its warranty and defect-liability clauses, the signed snag list, a handover file listing every major component with its brand and product warranty, the tax invoices, and the care instructions for each finish. With this file, a later claim is a simple matter of pointing to a written term; without it, it is one party's word against another's, and the party without documents loses. Clients should refuse to make the final payment until this file exists, because after payment the leverage to obtain it is gone.
- Get the workmanship warranty and defect-liability period in writing before work starts.
- Do a thorough, unhurried snagging at handover and sign a dated snag list.
- Insist on a handover file naming the brand and warranty of every major component.
- Keep all tax invoices — product warranties and any dispute depend on them.
- Treat a spoken 'lifetime warranty' as worthless unless it is written and specific.
- Read any AMC for scope, visit count, parts and response time before signing it.
- Follow the care instructions for each finish; misuse voids most warranties.
- Report defects within the warranty window in writing, not just by phone.
- Hold back final payment until the snag list is cleared and the file is handed over.
Where after-sales interior care is heading
The weakest point in Indian interior warranties has always been continuity — the party vanishing, the paperwork lost, the brand of a five-year-old hinge forgotten. The direction of improvement is digital and organised: handover files kept as shared documents, component lists with warranty dates recorded against each item, and service histories logged so that the eighth-year repair knows what was fitted in year one. As more interiors are built with named, branded hardware carrying traceable warranties, and as studios compete on after-sales service rather than only on the initial fit-out, the enforceable written warranty is slowly replacing the cheerful verbal promise.
For the client the lesson is timeless and simple: buy the warranty you can read, from a party you can find, and keep the papers that prove it. An established studio such as Aaditya Interior that hands over a documented file, offers a clear workmanship term and can be reached in year five is worth more, on this measure alone, than a lower quotation from a party whose warranty exists only in conversation. The cheapest fit-out is rarely the one that costs least to keep working.
The quiet arithmetic behind this is that an interior is not bought once but kept for years, and its real cost is the purchase plus everything spent to keep it working. A fit-out that is a little cheaper at handover but comes with no written warranty, no documented hardware and no reachable party can cost far more over a decade in repeated repairs, mismatched replacements and the sheer effort of chasing a vanished contractor. A slightly dearer fit-out with named hardware, a clear workmanship term and a handover file converts those later surprises into simple claims. When two quotations differ, the warranty, the documentation and the after-sales reach are as much a part of the price as the carpentry, and the client who weighs only the headline number is comparing half of each offer.
Frequently asked questions
What does a 'lifetime warranty' on interiors actually mean?
On its own, very little. 'Lifetime' is rarely defined and often refers to the expected life of the product rather than an open-ended promise, and if it is only spoken it is unenforceable. What matters is a written warranty that states exactly what is covered, for how many years, by whom, and what voids it. Treat any lifetime claim as marketing until it appears in the signed agreement with specifics.
What is a defect liability period in interior work?
It is a window after handover — commonly six to twelve months in a written agreement — during which the studio must return and fix defects that appear in normal use at no extra cost. It is entered through a signed snag list at handover and sits before the longer workmanship and product warranties. If an agreement has no such clause, every post-handover fix becomes a negotiation, so look for it before signing.
Do I need an AMC for my home interiors?
It depends on how much serviceable hardware the home has. A large modular kitchen, extensive wardrobes or automated fittings benefit from an AMC that keeps mechanisms adjusted and catches small faults early; a simple flat with basic joinery often does not need one. Judge any AMC by its scope — covered items, visit count, whether parts are included and the response time — rather than by its price alone.
Who do I claim from when a hinge or tap fails?
Usually from the component's brand, under its product warranty, because bought mechanisms and fittings fail under the maker's cover rather than the studio's workmanship term. The handover file should name the brand and warranty for each such item so the claim goes to the right party first time. If the failure is in how the part was fitted, that is workmanship and belongs to the studio.
Can a warranty be refused, and on what grounds?
Yes — most warranties exclude damage from misuse, water exposure beyond the material's rating, unauthorised modification, poor maintenance, and normal wear. This is why following the care instructions and keeping the finish within its intended use matters: a BWR board soaked repeatedly, or an acrylic shutter cleaned with an abrasive, can void the cover. Read the exclusions when the warranty is given, not when a claim is refused.
Sources & standards
- Consumer Protection Act, 2019 (India) — rights on goods and services, deficiency in service and defect in goods
- Bureau of Indian Standards — IS 303 and IS 710 (plywood grades) and relevant hardware and fittings standards referenced in product warranties
- National Building Code of India 2016, Part 1 and general contract practice — defect liability period in building and fit-out contracts
- Manufacturer warranty terms for branded hardware, laminates, sanitaryware and appliances, described generically — confirm each brand's current terms
- Time-Saver Standards and general facilities-management practice — maintenance intervals and service-life planning for interiors
- Price ranges: indicative October 2026 estimates — confirm locally before budgeting



